January 2000 - USR-TC - mailman.xmission.com

(usr-tc) Can't see TC NMC since changing subnets
by Harry Landers 18 Jan '00

18 Jan '00

We recently put all our in-house systems on a different subnet from the TC and now we can't see the NMC card on our chassis using the Total Control Manager nor can we ping it. The NMC and the NetServer PRI cards are on consecutive IP addresses on the same subnet and we can ping the PRI card and telnet into it with no problems from the in-house systems. Anybody run into this before? We don't want our in-house systems on the same subnet as our dialin chassis. thanks =============================================================== Harry Landers, President Panda Communications LLC 185 Walnut Avenue Santa Cruz CA 95060 Home of CRUZERS 831-457-CRUZ (2789) fax 831-457-056k - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) VSA's
by vanhalen＠coredcs.com 17 Jan '00

17 Jan '00

Anyone have or know of where one can find a current listing of all 3Com VSA's? - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

9 8

Re: (usr-tc) MIB OID for Frequency attenuation
by Steve Valiunas 17 Jan '00

17 Jan '00

Try .1.3.6.1.4.1.429.1.6.9.1.1.75 and .1.3.6.1.4.1.429.1.6.9.1.1.76. 75 will give you the frequencies and 76 will give you the values (in negative tenths of a DB). Steve Valiunas "Campbell Simpson" <Campbell.Simpson(a)telecom.co.nz> on 01/16/2000 04:04:02 PM Please respond to usr-tc(a)lists.xmission.com Sent by: "Campbell Simpson" <Campbell.Simpson(a)telecom.co.nz> To: usr-tc(a)lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) MIB OID for Frequency attenuation Hi I was wondering if anyone could help me find the OID for the mib that records the frequency attenuation response for the TCH modems (equivalent of ATY11). Been looking for ages and can't seem to find the right OID. Thanks Campbell Simpson - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

(usr-tc) MIB OID for Frequency attenuation
by Campbell Simpson 17 Jan '00

17 Jan '00

Hi I was wondering if anyone could help me find the OID for the mib that records the frequency attenuation response for the TCH modems (equivalent of ATY11). Been looking for ages and can't seem to find the right OID. Thanks Campbell Simpson - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Problem with Hiper ARC and ISDN 128
by Jorge Lozano 16 Jan '00

16 Jan '00

Hello everybody! I have a problem with my ISDN 128 access... I have a TCS with 2 HiperARC and 12 HiperDSP... the first ARC manage 8 DSP and the second manage 4... the first 10 DSP have a PRI number and the 11 and 12 DSP have a different number. When any user try to connect by ISDN (128K), and he use both B-channels... sometimes happens that one channel is assigned in the first 8 DSP and the second is assigned in 9th or 10th DSP card, then the user have 2 differents IP address because each ARC assign an IP number. Can anybody tell me what is the solution for this problem??? Thanks for all.. Jorge Lozano jorge(a)andinet.com Andinet On Line

2 1

(usr-tc) Flashing Dual T1/E1
by Steve Rivera 15 Jan '00

15 Jan '00

Is there a specific nic to be used with the dual t1/e1 card for it to support the e1 standard. In addition to the T1/E1 nac not accepting the E1 code.....Why? It accepts the T1 flash. ___________________________________________ ALSO IN THE MARKET FOR DSP's. Does anyone have Hiper DSP's available? WTB: HiperDSP...paying top dollar $$$$$ Available now, just out of service: All equipment Refurbished, flashed and tested Guaranteed working 1- Hiper NMC 4- Hiper ARC 1- Fan Tray 2- TC Chassis w/ Dual 45A Power 6- NMC 4- Netserver PRI 6- Dual T1/E1 1- Dual PRI 4- Quad Analog 30 -Quad Digital Modem Bundles: Dual 45A/Fan Tray/NMC v90/Netserver PRI/12x Quad Digital/Dual T1/PRI Single 70A/Integrated Fan Tray/NMC v90/Netserver PRI/12x Quad Digital/Dual T1/PRI Dual 70A/....... 5- MP8 v34 6- MP8I 8- MP16 v34 3- MP16I 5- Netserver 8I Plus 4- Netserver 16I Plus 5- Netserver 16I 5- Netserver 16 v34 Plus 25- Netserver 16 v34 .................................................... Steve Rivera - http://www.ISP-NetworkHardware.com (WRCA) sales(a)wrca.net v-732-833-2111 cell/pgr-732-433-5890 ---WAN ACCESS SPECIALIST--- Cisco, Ascend, Livingston, USR, Microcom, Computone, Kentrox, Adtran...and more .................................................... Steve Rivera - http://www.ISP-NetworkHardware.com (WRCA) sales(a)wrca.net v-732-833-2111 cell/pgr-732-433-5890 ---WAN ACCESS SPECIALIST--- Cisco, Ascend, Livingston, USR, Microcom, Computone, Kentrox, Adtran...and more - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

2 1

RE: (usr-tc) Busy out a DSP modem from the DSP console?
by Stainforth, Matthew 15 Jan '00

15 Jan '00

chdev tslot [# of timeslot] cmd tooserv (hard|soft) > -----Original Message----- > From: zip-usrtc(a)ran.zipcon.net [SMTP:zip-usrtc@ran.zipcon.net] > Sent: Friday, January 14, 2000 7:15 PM > To: usr-tc(a)lists.xmission.com > Subject: (usr-tc) Busy out a DSP modem from the DSP console? > > Is there a way to busy out a modem from the DSP console? I have TCM, > but do not see how to busy out an individual modem on the DSP. The > command line is more accessible anyway. Thanks for any tips. Dan > > - > To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" > with "unsubscribe usr-tc" in the body of the message. > For information on digests or retrieving files and old messages send > "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) HiperARC 4.1.22 and 5.10.9 Quads
by Andrew Smith 15 Jan '00

15 Jan '00

Will HiperArc version 4.1.22 work with: NMC 5.5.5 Quad Modem version 5.10.9 Dual Channelized T1 (386) 4.2.1 I'm scared to upgrade to 6.1.6 on the Single-Sided Quads. 5.10.9 is very stable for us. Anyone running 6.1.6 fine??? - andrew - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

7 7

(usr-tc) Busy out a DSP modem from the DSP console?
by zip-usrtc＠ran.zipcon.net 15 Jan '00

15 Jan '00

Is there a way to busy out a modem from the DSP console? I have TCM, but do not see how to busy out an individual modem on the DSP. The command line is more accessible anyway. Thanks for any tips. Dan - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0

(usr-tc) Can someone remove Vincent?
by vanhalen＠coredcs.com 15 Jan '00

15 Jan '00

Soon! - To unsubscribe to usr-tc, send an email to "majordomo(a)xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.

1 0