I believe Judy Blumhorst has recommended Svendsen's for organizers in the past. Dwyer makes a couple sizes too that will probably work off the shelf. But I like the idea of a hole for connecting the vang--Dwyer doesn't provide that feature. t Tom Smith & Jane Van Winkle Fairfield, WA M15-345 Chukar M17-064 Unnamed -----Original Message----- From: montgomery_boats-bounces+tom.smith=itron.com@mailman.xmission.com [mailto:montgomery_boats-bounces+tom.smith=itron.com@mailman.xmission.co m] On Behalf Of Maria Jorge Sent: Tuesday, December 21, 2004 4:45 AM To: Norm Bundek; For and about Montgomery Sailboats Subject: Re: M_Boats: Need a M15 center board pin and mast halyard organizer? Norm: My mast halyard organizer looks similar to yours except I have a hole for the vang at the rear. It was made by Svendsen's Marine. Beautiful quality. Is that where you are getting yours? Maria M17 ----- Original Message ----- From: "Norm Bundek" <nbundek@earthlink.net> To: <montgomery_boats@mailman.xmission.com> Sent: Tuesday, December 21, 2004 12:02 AM Subject: M_Boats: Need a M15 center board pin and mast halyard organizer? As part of my total refurb on #172, I just dropped out the center board. It was easier than I anticipated thanks to the prep done by reading every post on the Montgomery message board. I'm have a new stainless steel pin made and could some others made at the same time. While looking through every picture of like sized boats, I found a picture of a mast halyard organizer on a Potter site. I'm getting a price for this also. Let me know if your interested gettin one or both. You can see what the organizer looks like on one of my web sites: http://www.yourcommunityweb.com/Monty15/halyardorganizer.htm Are there any Montgomery owners in the Ventura CA area? Norm M15 #172 Ventura, Ca _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats