I want to install a stern rail om my M 17. Railmakers, who did the pulpits for the M's, is here in Costa Mesa and were getting ready to send one off to an M 15 owner. They let me size that one to my M 17. I have attached a couple of photos. The M 15 stern rail seems to be shy about 8" from being the correct width for the M 17. My question is this....does anyone know the exact specifications of the cockpit of the M 17 (specifically that area where the stern rail would mount) ? Railmakers does not have that info for the M 17. Thank you.... Tim Brown Hull #254
I am also searching a stern rail for my M-17 so any info you get I would appreciate it also. I found something on line for a company that manufactured then but can’t find then again. Have now decided It might be best to have a local shop build one to insure a perfect fit. In am located in upper NY Charlie Adams. Sent from my iPhone
On Sep 2, 2020, at 3:47 PM, Tim Brown <tim-brown@sbcglobal.net> wrote:
I want to install a stern rail om my M 17. Railmakers, who did the pulpits for the M's, is here in Costa Mesa and were getting ready to send one off to an M 15 owner. They let me size that one to my M 17. I have attached a couple of photos. The M 15 stern rail seems to be shy about 8" from being the correct width for the M 17. My question is this....does anyone know the exact specifications of the cockpit of the M 17 (specifically that area where the stern rail would mount) ? Railmakers does not have that info for the M 17.
Thank you....
Tim Brown Hull #254
<IMG_0824 (004).jpg> <IMG_0823 (002).JPG>
What dimensions do you need? I show 61-1/2" between the outer edges of the cockpit coaming just forward of the "dip" for the stern light. Henry M17 #310 Monita On Wed, Sep 2, 2020, 2:47 PM Tim Brown <tim-brown@sbcglobal.net> wrote:
I want to install a stern rail om my M 17. Railmakers, who did the pulpits for the M's, is here in Costa Mesa and were getting ready to send one off to an M 15 owner. They let me size that one to my M 17. I have attached a couple of photos. The M 15 stern rail seems to be shy about 8" from being the correct width for the M 17. My question is this....does anyone know the exact specifications of the cockpit of the M 17 (specifically that area where the stern rail would mount) ? Railmakers does not have that info for the M 17.
Thank you....
Tim Brown Hull #254
Tim, Here is a thought. Could you create a template of the stern coaming and send it to Railmakers? Then they can take the measurements they need to fit your boat. ~Skip <Sent from my iPhone>
On Sep 2, 2020, at 11:18 PM, Henry Rodriguez <heinzir@gmail.com> wrote:
What dimensions do you need? I show 61-1/2" between the outer edges of the cockpit coaming just forward of the "dip" for the stern light.
Henry M17 #310 Monita
On Wed, Sep 2, 2020, 2:47 PM Tim Brown <tim-brown@sbcglobal.net> wrote:
I want to install a stern rail om my M 17. Railmakers, who did the pulpits for the M's, is here in Costa Mesa and were getting ready to send one off to an M 15 owner. They let me size that one to my M 17. I have attached a couple of photos. The M 15 stern rail seems to be shy about 8" from being the correct width for the M 17. My question is this....does anyone know the exact specifications of the cockpit of the M 17 (specifically that area where the stern rail would mount) ? Railmakers does not have that info for the M 17.
Thank you....
Tim Brown Hull #254
<20200902_162502.jpg> <20200902_162735.jpg>
Railmakers in Costa Mesa should have all the measurements- they've made many of them. jerry ________________________________ From: montgomery_boats <montgomery_boats-bounces@mailman.xmission.com> on behalf of William Campion via montgomery_boats <montgomery_boats@mailman.xmission.com> Sent: Thursday, September 3, 2020 3:23 AM To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Stern Rail for M 17 Tim, Here is a thought. Could you create a template of the stern coaming and send it to Railmakers? Then they can take the measurements they need to fit your boat. ~Skip <Sent from my iPhone>
On Sep 2, 2020, at 11:18 PM, Henry Rodriguez <heinzir@gmail.com> wrote:
What dimensions do you need? I show 61-1/2" between the outer edges of the cockpit coaming just forward of the "dip" for the stern light.
Henry M17 #310 Monita
On Wed, Sep 2, 2020, 2:47 PM Tim Brown <tim-brown@sbcglobal.net> wrote:
I want to install a stern rail om my M 17. Railmakers, who did the pulpits for the M's, is here in Costa Mesa and were getting ready to send one off to an M 15 owner. They let me size that one to my M 17. I have attached a couple of photos. The M 15 stern rail seems to be shy about 8" from being the correct width for the M 17. My question is this....does anyone know the exact specifications of the cockpit of the M 17 (specifically that area where the stern rail would mount) ? Railmakers does not have that info for the M 17.
Thank you....
Tim Brown Hull #254
<20200902_162502.jpg> <20200902_162735.jpg>
participants (5)
-
Charlie Adams -
Henry Rodriguez -
jerry montgomery -
Tim Brown -
William Campion