Re: M_Boats: cracks in hull deck joint
Tyler, I used a caulking gun with Six 10 epoxy. Thick stuff, works great. No mess. Premix nozzle, easy to apply in tight spaces like hull deck joint Neil Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5 -------- Original message -------- From: montgomery_boats-request@mailman.xmission.com Date: 07/28/2015 1:47 PM (GMT-08:00) To: montgomery_boats@mailman.xmission.com Subject: montgomery_boats Digest, Vol 149, Issue 25 Send montgomery_boats mailing list submissions to montgomery_boats@mailman.xmission.com To subscribe or unsubscribe via the World Wide Web, visit https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats or, via email, send a message with subject or body 'help' to montgomery_boats-request@mailman.xmission.com You can reach the person managing the list at montgomery_boats-owner@mailman.xmission.com When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..." Today's Topics: 1. Re: M15 Hull Deck Joint (jerry@jerrymontgomery.org) 2. Re: Looking for a new mainsail (GILASAILR@aol.com) ---------------------------------------------------------------------- Message: 1 Date: Tue, 28 Jul 2015 11:52:59 -0700 From: <jerry@jerrymontgomery.org> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: M15 Hull Deck Joint Message-ID: <A6170B2D2C0449FF8CA855C4809CEBF5@CH002914> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original I'd use a diamond bit on a fast drill motor or a small-based router and saw it out. I have one you can use if you want to come by. Best to call first- my # is 916 606 4619. -----Original Message----- From: Tyler Backman Sent: Tuesday, July 28, 2015 9:18 AM To: For and about Montgomery Sailboats Subject: M_Boats: M15 Hull Deck Joint Jerry, Inspecting my M15 at home, I noticed the hull deck joint is very cracked- at least a several foot long crack on each side. I suspect it was from really bad docking (slamming into docks at high speed) or getting crushed between two other boats. The gusts on Saturday were burying my rail, and there was water pooled in the isolated storage compartments on both sides of the cabin. I remember your suggestion about sealing it with flocked cotton and epoxy mix, but how can I get it into the flanged joint? Do you think I need to completely take the deck off so I can clean up the surfaces, or just unbolt the cracked part, pry it open, and inject the mix with a syringe? Thanks, Tyler ------------------------------ Message: 2 Date: Tue, 28 Jul 2015 16:47:19 -0400 From: GILASAILR@aol.com To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Looking for a new mainsail Message-ID: <bd098.387d30c0.42e94457@aol.com> Content-Type: text/plain; charset="us-ascii" Ullman Sails Newport Beach - ask for Keith Magnussen if you want info from them re. delivery and pricing - made in USA and 'I love my Ullman Sails' . NFIW - just a very happy customer. Photo of main and 155 in near zero - they look better in a breeze ! GO In a message dated 7/27/2015 7:00:22 P.M. US Mountain Standard Time, thomaspbuzzi@gmail.com writes: Are there any domestic, custom sail makers familiar with Montgomery 17 mainsails? First hand experience appreciated. I am also considering roller furling on the jib. Is there a difference between roller furling or roller reefing a jib besides spelling? Thanks, Tom B
Neil, off topic but I have gone to the "power" side of boating. Sold the M-15 for a song and got a C-Dory 22 with twin Hondas on transom. This boat gets me on the river without worrying about wind. Docked at Freeport. My "sailing days" are over.....Larry (Gone to the dark side) -----Original Message----- From: montgomery_boats [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Neil Dorf Sent: Tuesday, July 28, 2015 2:10 PM To: 'For and about Montgomery Sailboats' Subject: Re: M_Boats: cracks in hull deck joint Tyler, I used a caulking gun with Six 10 epoxy. Thick stuff, works great. No mess. Premix nozzle, easy to apply in tight spaces like hull deck joint Neil Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5 -------- Original message -------- From: montgomery_boats-request@mailman.xmission.com Date: 07/28/2015 1:47 PM (GMT-08:00) To: montgomery_boats@mailman.xmission.com Subject: montgomery_boats Digest, Vol 149, Issue 25 Send montgomery_boats mailing list submissions to montgomery_boats@mailman.xmission.com To subscribe or unsubscribe via the World Wide Web, visit https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats or, via email, send a message with subject or body 'help' to montgomery_boats-request@mailman.xmission.com You can reach the person managing the list at montgomery_boats-owner@mailman.xmission.com When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..." Today's Topics: 1. Re: M15 Hull Deck Joint (jerry@jerrymontgomery.org) 2. Re: Looking for a new mainsail (GILASAILR@aol.com) ---------------------------------------------------------------------- Message: 1 Date: Tue, 28 Jul 2015 11:52:59 -0700 From: <jerry@jerrymontgomery.org> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: M15 Hull Deck Joint Message-ID: <A6170B2D2C0449FF8CA855C4809CEBF5@CH002914> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original I'd use a diamond bit on a fast drill motor or a small-based router and saw it out. I have one you can use if you want to come by. Best to call first- my # is 916 606 4619. -----Original Message----- From: Tyler Backman Sent: Tuesday, July 28, 2015 9:18 AM To: For and about Montgomery Sailboats Subject: M_Boats: M15 Hull Deck Joint Jerry, Inspecting my M15 at home, I noticed the hull deck joint is very cracked- at least a several foot long crack on each side. I suspect it was from really bad docking (slamming into docks at high speed) or getting crushed between two other boats. The gusts on Saturday were burying my rail, and there was water pooled in the isolated storage compartments on both sides of the cabin. I remember your suggestion about sealing it with flocked cotton and epoxy mix, but how can I get it into the flanged joint? Do you think I need to completely take the deck off so I can clean up the surfaces, or just unbolt the cracked part, pry it open, and inject the mix with a syringe? Thanks, Tyler ------------------------------ Message: 2 Date: Tue, 28 Jul 2015 16:47:19 -0400 From: GILASAILR@aol.com To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Looking for a new mainsail Message-ID: <bd098.387d30c0.42e94457@aol.com> Content-Type: text/plain; charset="us-ascii" Ullman Sails Newport Beach - ask for Keith Magnussen if you want info from them re. delivery and pricing - made in USA and 'I love my Ullman Sails' . NFIW - just a very happy customer. Photo of main and 155 in near zero - they look better in a breeze ! GO In a message dated 7/27/2015 7:00:22 P.M. US Mountain Standard Time, thomaspbuzzi@gmail.com writes: Are there any domestic, custom sail makers familiar with Montgomery 17 mainsails? First hand experience appreciated. I am also considering roller furling on the jib. Is there a difference between roller furling or roller reefing a jib besides spelling? Thanks, Tom B -------------- next part -------------- A non-text attachment was scrubbed... Name: 10903936_10203575410806040_8889588982728909589_o.jpg Type: image/jpeg Size: 254999 bytes Desc: not available URL: <https://mailman.xmission.com/cgi-bin/mailman/private/montgomery_boats/attachments/20150728/97985313/attachment.jpg> ------------------------------ Subject: Digest Footer _______________________________________________ montgomery_boats mailing list montgomery_boats@mailman.xmission.com https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats Remember, there is no privacy on the Internet! ------------------------------ End of montgomery_boats Digest, Vol 149, Issue 25 *************************************************
RIP, Larry On Thu, Jul 30, 2015 at 10:49 AM, Hughston, Larry@DGS < Larry.Hughston@dgs.ca.gov> wrote:
Neil, off topic but I have gone to the "power" side of boating. Sold the M-15 for a song and got a C-Dory 22 with twin Hondas on transom. This boat gets me on the river without worrying about wind. Docked at Freeport. My "sailing days" are over.....Larry (Gone to the dark side)
-----Original Message----- From: montgomery_boats [mailto: montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Neil Dorf Sent: Tuesday, July 28, 2015 2:10 PM To: 'For and about Montgomery Sailboats' Subject: Re: M_Boats: cracks in hull deck joint
Tyler, I used a caulking gun with Six 10 epoxy. Thick stuff, works great. No mess. Premix nozzle, easy to apply in tight spaces like hull deck joint Neil Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5
-------- Original message -------- From: montgomery_boats-request@mailman.xmission.com Date: 07/28/2015 1:47 PM (GMT-08:00) To: montgomery_boats@mailman.xmission.com Subject: montgomery_boats Digest, Vol 149, Issue 25
Send montgomery_boats mailing list submissions to montgomery_boats@mailman.xmission.com
To subscribe or unsubscribe via the World Wide Web, visit
https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
or, via email, send a message with subject or body 'help' to montgomery_boats-request@mailman.xmission.com
You can reach the person managing the list at montgomery_boats-owner@mailman.xmission.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..."
Today's Topics:
1. Re: M15 Hull Deck Joint (jerry@jerrymontgomery.org) 2. Re: Looking for a new mainsail (GILASAILR@aol.com)
----------------------------------------------------------------------
Message: 1 Date: Tue, 28 Jul 2015 11:52:59 -0700 From: <jerry@jerrymontgomery.org> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: M15 Hull Deck Joint Message-ID: <A6170B2D2C0449FF8CA855C4809CEBF5@CH002914> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original
I'd use a diamond bit on a fast drill motor or a small-based router and saw it out. I have one you can use if you want to come by. Best to call first- my # is 916 606 4619.
-----Original Message----- From: Tyler Backman Sent: Tuesday, July 28, 2015 9:18 AM To: For and about Montgomery Sailboats Subject: M_Boats: M15 Hull Deck Joint
Jerry,
Inspecting my M15 at home, I noticed the hull deck joint is very cracked- at least a several foot long crack on each side. I suspect it was from really bad docking (slamming into docks at high speed) or getting crushed between two other boats. The gusts on Saturday were burying my rail, and there was water pooled in the isolated storage compartments on both sides of the cabin.
I remember your suggestion about sealing it with flocked cotton and epoxy mix, but how can I get it into the flanged joint? Do you think I need to completely take the deck off so I can clean up the surfaces, or just unbolt the cracked part, pry it open, and inject the mix with a syringe?
Thanks, Tyler
------------------------------
Message: 2 Date: Tue, 28 Jul 2015 16:47:19 -0400 From: GILASAILR@aol.com To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Looking for a new mainsail Message-ID: <bd098.387d30c0.42e94457@aol.com> Content-Type: text/plain; charset="us-ascii"
Ullman Sails Newport Beach - ask for Keith Magnussen if you want info from them re. delivery and pricing - made in USA and 'I love my Ullman Sails' . NFIW - just a very happy customer. Photo of main and 155 in near zero - they look better in a breeze !
GO
In a message dated 7/27/2015 7:00:22 P.M. US Mountain Standard Time, thomaspbuzzi@gmail.com writes:
Are there any domestic, custom sail makers familiar with Montgomery 17 mainsails? First hand experience appreciated. I am also considering roller furling on the jib. Is there a difference between roller furling or roller reefing a jib besides spelling? Thanks, Tom B
participants (3)
-
Hughston, Larry＠DGS -
Neil Dorf -
Thomas Buzzi