Mr. Montgomery, My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
Could you have that backwards? We made most of the 17s with three-pintle setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom. I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop. jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery, My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len Do you have a slow PC? Try a Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
Jerry, My 2004 M17 has three pintles for the big sliding wood rudder, and my Ida Sailor rudder was designed to fit those three. I don't know if the company made an Ida for the older model (although nothing could be called "old" compared to your ma). On May 1, 2013, at 4:40 PM, jerry montgomery wrote:
Could you have that backwards? We made most of the 17s with three-pintle setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery, My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
My IdaSailor rudder sounds like Tom's. it was made for a 2005 M17. Rick M17 #633 Lynne L On Wednesday, May 1, 2013, Tom Jenkins wrote:
Jerry, My 2004 M17 has three pintles for the big sliding wood rudder, and my Ida Sailor rudder was designed to fit those three. I don't know if the company made an Ida for the older model (although nothing could be called "old" compared to your ma).
On May 1, 2013, at 4:40 PM, jerry montgomery wrote:
Could you have that backwards? We made most of the 17s with three-pintle setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com <javascript:;>> To: "For and about Montgomery Sailboats" < montgomery_boats@mailman.xmission.com <javascript:;>> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery, My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
Jerry, My boat has only the two grugeons. The Idasailor rudder has three pintle locations. I assume yours are stock items so the backset from the transom should match my existing ones and in that case I would like to purchase a grugeon from you. Thanks for your quick reply. Regards, Tom B On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>wrote:
Could you have that backwards? We made most of the 17s with three-pintle setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
Jerry, Oops, my M 17 was built in 1977. That said, the number of gugeons is correct at 2 on the boat and the ida rudder requires three so when convenient I would appreciate you sending me one of your stock items. Just let me know how much and how to get you the funds. Thanks, Tom Buzzi On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>wrote:
Could you have that backwards? We made most of the 17s with three-pintle setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
Hello Jerry, Would you let me know how I can obtain one of the rudder grugeons that you said you still had? Thanks, Tom Buzzi On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>wrote:
Could you have that backwards? We made most of the 17s with three-pintle setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
It's on my list- I'll be going to the shop before the weekend is over and I'll check it out then jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Thursday, May 16, 2013 4:22 PM Subject: Re: M_Boats: Ida rudder
Hello Jerry, Would you let me know how I can obtain one of the rudder grugeons that you said you still had? Thanks, Tom Buzzi
On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>wrote:
Could you have that backwards? We made most of the 17s with three-pintle setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
Tom- I have in my hopt little hand a gudgeon, the base measures 1 5/8 X 4, and the half inch hole is centered1 1/4" off the underside of the base. It's your for the bargain price of a ten-spot, plus shipping. I'll need an address. jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Thursday, May 16, 2013 4:22 PM Subject: Re: M_Boats: Ida rudder
Hello Jerry, Would you let me know how I can obtain one of the rudder grugeons that you said you still had? Thanks, Tom Buzzi
On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>wrote:
Could you have that backwards? We made most of the 17s with three-pintle setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
Hi jerry, Sounds like a deal to me. How would you like the funds delivered? My address is 302 Palmetto Avenue Rockport, Texas 78382 Thanks, Tom Buzzi On Mon, May 20, 2013 at 4:07 PM, jerry montgomery <jerry@jerrymontgomery.org
wrote:
Tom- I have in my hopt little hand a gudgeon, the base measures 1 5/8 X 4, and the half inch hole is centered1 1/4" off the underside of the base. It's your for the bargain price of a ten-spot, plus shipping. I'll need an address.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Thursday, May 16, 2013 4:22 PM Subject: Re: M_Boats: Ida rudder
Hello Jerry,
Would you let me know how I can obtain one of the rudder grugeons that you said you still had? Thanks, Tom Buzzi
On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>**wrote:
Could you have that backwards? We made most of the 17s with three-pintle
setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.**xmission.com<montgomery_boats@mailman.xmission.com>
Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http:**//www.spamfighter.com/SLOW-** PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
Shipping came to 5.80, so the total would be 15.80. My address is 3749 Rock Island Dr Sacramento 95827. jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Monday, May 20, 2013 7:33 PM Subject: Re: M_Boats: Ida rudder
Hi jerry, Sounds like a deal to me. How would you like the funds delivered? My address is 302 Palmetto Avenue Rockport, Texas 78382 Thanks, Tom Buzzi
On Mon, May 20, 2013 at 4:07 PM, jerry montgomery <jerry@jerrymontgomery.org
wrote:
Tom- I have in my hopt little hand a gudgeon, the base measures 1 5/8 X 4, and the half inch hole is centered1 1/4" off the underside of the base. It's your for the bargain price of a ten-spot, plus shipping. I'll need an address.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Thursday, May 16, 2013 4:22 PM Subject: Re: M_Boats: Ida rudder
Hello Jerry,
Would you let me know how I can obtain one of the rudder grugeons that you said you still had? Thanks, Tom Buzzi
On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>**wrote:
Could you have that backwards? We made most of the 17s with three-pintle
setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.**xmission.com<montgomery_boats@mailman.xmission.com>
Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http:**//www.spamfighter.com/SLOW-** PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
Jerry, The gudgeon arrived yesterday. Thank you. Tom Buzzi On Thu, May 23, 2013 at 1:04 PM, jerry montgomery <jerry@jerrymontgomery.org
wrote:
Shipping came to 5.80, so the total would be 15.80. My address is 3749 Rock Island Dr Sacramento 95827.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Monday, May 20, 2013 7:33 PM Subject: Re: M_Boats: Ida rudder
Hi jerry,
Sounds like a deal to me. How would you like the funds delivered? My address is 302 Palmetto Avenue Rockport, Texas 78382 Thanks, Tom Buzzi
On Mon, May 20, 2013 at 4:07 PM, jerry montgomery < jerry@jerrymontgomery.org
wrote:
Tom- I have in my hopt little hand a gudgeon, the base measures 1 5/8 X
4, and the half inch hole is centered1 1/4" off the underside of the base. It's your for the bargain price of a ten-spot, plus shipping. I'll need an address.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.**xmission.com<montgomery_boats@mailman.xmission.com>
Sent: Thursday, May 16, 2013 4:22 PM Subject: Re: M_Boats: Ida rudder
Hello Jerry,
Would you let me know how I can obtain one of the rudder grugeons that you said you still had? Thanks, Tom Buzzi
On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>****wrote:
Could you have that backwards? We made most of the 17s with three-pintle
setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.**xm**ission.com<http://xmission.com> <montgomery_boats@**mailman.xmission.com<montgomery_boats@mailman.xmission.com>
>
Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to
install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http:****//www.spamfighter.com/SLOW-****<http://www.spamfighter.com/SLOW-**> PCfighter?cid=sigen<http://**www.spamfighter.com/SLOW-** PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
Th ank you1 jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, May 29, 2013 12:50 PM Subject: Re: M_Boats: Ida rudder
Jerry, The gudgeon arrived yesterday. Thank you. Tom Buzzi
On Thu, May 23, 2013 at 1:04 PM, jerry montgomery <jerry@jerrymontgomery.org
wrote:
Shipping came to 5.80, so the total would be 15.80. My address is 3749 Rock Island Dr Sacramento 95827.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Monday, May 20, 2013 7:33 PM Subject: Re: M_Boats: Ida rudder
Hi jerry,
Sounds like a deal to me. How would you like the funds delivered? My address is 302 Palmetto Avenue Rockport, Texas 78382 Thanks, Tom Buzzi
On Mon, May 20, 2013 at 4:07 PM, jerry montgomery < jerry@jerrymontgomery.org
wrote:
Tom- I have in my hopt little hand a gudgeon, the base measures 1 5/8 X
4, and the half inch hole is centered1 1/4" off the underside of the base. It's your for the bargain price of a ten-spot, plus shipping. I'll need an address.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.**xmission.com<montgomery_boats@mailman.xmission.com>
Sent: Thursday, May 16, 2013 4:22 PM Subject: Re: M_Boats: Ida rudder
Hello Jerry,
Would you let me know how I can obtain one of the rudder grugeons that you said you still had? Thanks, Tom Buzzi
On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>****wrote:
Could you have that backwards? We made most of the 17s with three-pintle
setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.**xm**ission.com<http://xmission.com> <montgomery_boats@**mailman.xmission.com<montgomery_boats@mailman.xmission.com> > >> Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to > install > an Ida sailor rudder on it from a 2005 Montgomery 17. That setup > uses > three > pintles whereas my older stock rudder model uses only two. Can a > third > be > added so this setup will work on my boat or is there some other > consideration that needs tending to? > You mentioned you have a stock of old parts. Do you have a set of > the > old > grugeon/pintle (s) available? > Regards, > Tom B > > > > -- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http:****//www.spamfighter.com/SLOW-****<http://www.spamfighter.com/SLOW-**> PCfighter?cid=sigen<http://**www.spamfighter.com/SLOW-** PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen> > >
participants (4)
-
jerry montgomery -
Rick Davies -
Thomas Buzzi -
Tom Jenkins