Has anyone on the list encountered this problem: I have a SeaDog 6 gang switch panel (Model 422110) installed on my M17 (I don't know if this panel is original equipment on a '92 M17 or not, but the 422110 is a common panel). The thing doesn't seem to like 1 1/4 inch fuses, which is about the only size I can find. Measuring the existing fuse (original equipment I assume) I come up with approximately 1 3/16 inches. Although the 1 1/4 inch fuse will fit in the fuse holder, the larger fuse won't work. I've tried both sizes in the same And get this, a SeaDog tech I've been emailing tried a 1 1/4 in a 422110 and it worked for him. Any ideas? t
This problem is solved. Both size fuses work so long as one makes sure all the contacts on the bus on the back of the panel have been cleaned of corrosion that's built up over the years. Now if I can just figure out how to turn that bathroom fan on... t On Thu, Feb 7, 2013 at 4:35 PM, Tom Smith <openboatt@gmail.com> wrote:
Has anyone on the list encountered this problem:
I have a SeaDog 6 gang switch panel (Model 422110) installed on my M17 (I don't know if this panel is original equipment on a '92 M17 or not, but the 422110 is a common panel). The thing doesn't seem to like 1 1/4 inch fuses, which is about the only size I can find. Measuring the existing fuse (original equipment I assume) I come up with approximately 1 3/16 inches. Although the 1 1/4 inch fuse will fit in the fuse holder, the larger fuse won't work. I've tried both sizes in the same
And get this, a SeaDog tech I've been emailing tried a 1 1/4 in a 422110 and it worked for him.
Any ideas? t
participants (1)
-
Tom Smith