I tried to send pictures of my motor mount but file to big and rejected. I couldn’t find manufacturer of the one I have but works easy. No name on it nit my research looking for manufacturer I found a mount on Amazon that looks as good as a Westmarine, had three, and all $300. One on Amazon rated to 25 hp cost $59 including all for mounting. Had to check again to make sure I was correct on it. It’s there and everything correct from me. Still looking for one on my M-17. Charlie Sent from my iPhone

On Oct 14, 2020, at 11:10 AM, Dave Scobie <scoobscobie@gmail.com> wrote:

Alex:

Somewhere a few years ago I read about a person changing out the prop on the small Honda - wasn't a Mboat. I can't remember any specifics.

The general consensus was the problem is the motor will likely be overstressed under the load - especially a concern with the powerhead being or cooled.

:: Dave Scobie :: M6'8" #650 :: SV SWALLOW - sv-swallow.com :: former owner M17 #375 SWEET PEA - m17-375.com :: former owner M15 #288 SCRED - www.freewebs.com/m15-named-scred/

...

...

On Wed, Oct 14, 2020, 8:03 AM Alex Conley <conley.alex@gmail.com> wrote: Ive also searched for a high thrust prop for my 35 yr old Honda 2 hp but never seen one. In these days of 3D printers/milling, strong plastics and computer designs, it would seem there might be an opportunity for someone to work up some designs that could then be made on order.