This might be a question for Jerry, but maybe some of the rest if you might have the answer. I am about to drill a hole in the top of my cabin to install the plug for the mast light. I am planning to put the half inch hole on the aft/ port side of the mast step. I am concerned that I not drill through any wires imbedded in the ceiling. Thanks, Bill M-17 #279 Endelig
I think it's in the clear, Bill Jerry ----- Original Message ----- From: "Bill Sylvester" <wmcsyl1@cox.net> To: <montgomery_boats@mailman.xmission.com> Sent: Wednesday, January 21, 2004 6:47 AM Subject: M_Boats: New Old M-17
This might be a question for Jerry, but maybe some of the rest if you might have the answer.
I am about to drill a hole in the top of my cabin to install the plug for the mast light. I am planning to put the half inch hole on the aft/ port side of the mast step. I am concerned that I not drill through any wires imbedded in the ceiling.
Thanks,
Bill M-17 #279 Endelig
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Thanks Jerry, it went smoothly. Bill On Saturday, January 24, 2004, at 11:41 AM, Jerry Montgomery wrote:
I think it's in the clear, Bill
Jerry
----- Original Message ----- From: "Bill Sylvester" <wmcsyl1@cox.net> To: <montgomery_boats@mailman.xmission.com> Sent: Wednesday, January 21, 2004 6:47 AM Subject: M_Boats: New Old M-17
This might be a question for Jerry, but maybe some of the rest if you might have the answer.
I am about to drill a hole in the top of my cabin to install the plug for the mast light. I am planning to put the half inch hole on the aft/ port side of the mast step. I am concerned that I not drill through any wires imbedded in the ceiling.
Thanks,
Bill M-17 #279 Endelig
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
participants (2)
-
Bill Sylvester -
Jerry Montgomery