Bill, Thanks for the information. One more thing to put on a launch checklist. -----Larry -----Original Message----- From: BILLAMICASR@aol.com [mailto:BILLAMICASR@aol.com] Sent: Monday, July 26, 2004 4:35 PM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Motor Locks for 2HP Honda Hi Larry, I think I'd ask the service dept of a outboard shop. The bolt is stainless and the housing is aluminum (I believe). I'm not sure any locktite would be appropriate or acceptable. I put checking the bolts on a list of things to do before I use it. Never had any looseness. The person who lost the motor was on another forum. However, after reading his post I looked at mine and determined it sure looks possible to me... Bill (SF) _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats