Nicopress says their zinc-copper sleeves on SS exceed wire strength. If memory is right they spec to use 2 sleeves on 1x19 SS wire and 1 sleeve on more flexible wire. Bill
Thanks everyone for your helpful reply. I would like to get new riggings soon but sounds like I probably should wait till Jerry get back to me since I have no idea what I'm doing myself. I'll head down to WM as well to see what the shop have and what they can do. Donglai
I think the issue was about the quality of the crimp made by the small crimping tool rather than the actual hardware. Norm -----Original Message----- From: montgomery_boats-bounces+nl=sagatech.com@mailman.xmission.com [mailto:montgomery_boats-bounces+nl=sagatech.com@mailman.xmission.com] On Behalf Of Wcpritchett@aol.com Sent: Thursday, September 07, 2006 5:48 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Shroud for M15 Nicopress says their zinc-copper sleeves on SS exceed wire strength. If memory is right they spec to use 2 sleeves on 1x19 SS wire and 1 sleeve on more flexible wire. Bill _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
participants (3)
-
Donglai Gong -
Norm Lane -
Wcpritchett＠aol.com