RE: M_Boats: Gel Coat Matching
Thanks, will do. ---L -----Original Message----- From: Wcpritchett@aol.com [mailto:Wcpritchett@aol.com] Sent: Saturday, April 16, 2005 4:44 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Gel Coat Matching Ask the factory to sell you a pint for touchup. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Or get this...Interlux Perfection, two part polyurethane. http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scstore+zk... The cream color is a perfect match to the Montgomery Gelcoat. Sticks to epoxy and polyester. High sheen. Goes on with a roller. Gets you high. I just coated my centerboard with it. Went on smooth a silk and covered in one (thin) coat. Although, you need to watch the dust in the air. --Bob Olson M-15 #219 Sequel http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scstore+zk... Hughston, Larry wrote:
Thanks, will do. ---L
-----Original Message----- From: Wcpritchett@aol.com [mailto:Wcpritchett@aol.com] Sent: Saturday, April 16, 2005 4:44 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Gel Coat Matching
Ask the factory to sell you a pint for touchup. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
pictures, Bob, pictures -----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com] On Behalf Of Bob Olson Sent: Monday, April 18, 2005 4:16 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Gel Coat Matching Or get this...Interlux Perfection, two part polyurethane. http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scstore+zk zt7270ffc9dec9+pr+ilxYHS070 The cream color is a perfect match to the Montgomery Gelcoat. Sticks to epoxy and polyester. High sheen. Goes on with a roller. Gets you high. I just coated my centerboard with it. Went on smooth a silk and covered in one (thin) coat. Although, you need to watch the dust in the air. --Bob Olson M-15 #219 Sequel http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scstore+zk zt7270ffc9dec9+pr+ilxYHS070 Hughston, Larry wrote:
Thanks, will do. ---L
-----Original Message----- From: Wcpritchett@aol.com [mailto:Wcpritchett@aol.com] Sent: Saturday, April 16, 2005 4:44 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Gel Coat Matching
Ask the factory to sell you a pint for touchup. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Third time I've tried to send this picture to the group. The list won't accept anything over 40k. Oh well, here's my original message... Your wish is my command... Here it is, propped up on nails so I could paint both sides at once. If you squint, you can see the sheen towards the back of the board. Amazing how the stuff flowed out. No thinner used. And hey, I just found a Honda 2hp 4 stroke for $300. I think I must be livin' right. Bob Olson htmills@bright.net wrote:
pictures, Bob, pictures
-----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com] On Behalf Of Bob Olson Sent: Monday, April 18, 2005 4:16 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Gel Coat Matching
Or get this...Interlux Perfection, two part polyurethane.
http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scstore+zk zt7270ffc9dec9+pr+ilxYHS070
The cream color is a perfect match to the Montgomery Gelcoat. Sticks to epoxy and polyester. High sheen. Goes on with a roller. Gets you high.
I just coated my centerboard with it. Went on smooth a silk and covered in one (thin) coat. Although, you need to watch the dust in the air.
--Bob Olson
M-15 #219 Sequel
http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scstore+zk zt7270ffc9dec9+pr+ilxYHS070
Hughston, Larry wrote:
Thanks, will do. ---L
-----Original Message----- From: Wcpritchett@aol.com [mailto:Wcpritchett@aol.com] Sent: Saturday, April 16, 2005 4:44 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Gel Coat Matching
Ask the factory to sell you a pint for touchup. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Nada, Bob If you e-mail it directly to me, I'll be glad to post in on my page for the list's enjoyment. Tod -----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com] On Behalf Of Bob Olson Sent: Monday, April 18, 2005 6:41 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Gel Coat Matching--picture Third time I've tried to send this picture to the group. The list won't accept anything over 40k. Oh well, here's my original message... Your wish is my command... Here it is, propped up on nails so I could paint both sides at once. If you squint, you can see the sheen towards the back of the board. Amazing how the stuff flowed out. No thinner used. And hey, I just found a Honda 2hp 4 stroke for $300. I think I must be livin' right. Bob Olson htmills@bright.net wrote:
pictures, Bob, pictures
-----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.co m] On Behalf Of Bob Olson Sent: Monday, April 18, 2005 4:16 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Gel Coat Matching
Or get this...Interlux Perfection, two part polyurethane.
http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scsto re+zk zt7270ffc9dec9+pr+ilxYHS070
The cream color is a perfect match to the Montgomery Gelcoat. Sticks to epoxy and polyester. High sheen. Goes on with a roller. Gets you high.
I just coated my centerboard with it. Went on smooth a silk and covered in one (thin) coat. Although, you need to watch the dust in the air.
--Bob Olson
M-15 #219 Sequel
http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scsto re+zk zt7270ffc9dec9+pr+ilxYHS070
Hughston, Larry wrote:
Thanks, will do. ---L
-----Original Message----- From: Wcpritchett@aol.com [mailto:Wcpritchett@aol.com] Sent: Saturday, April 16, 2005 4:44 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Gel Coat Matching
Ask the factory to sell you a pint for touchup. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Here we go, a link...to my rebuilt M-15 centerboard. If anyone is interested in what they look like. http://www.users.qwest.net/~bobo4u/monty_pix.html I just scored a 1986 Honda 2hp so I didn't have time to post the centerboard picture before I left. To be honest, the shot makes the board look better than it is. I'd rate it an 8.5 on a ten scale--not quite new-looking. But the part that I repaired should be better than the original--durability wise. And the color is a dead-on match. I also bought a new pendant line today. If you buy the right stuff, it's a sinch to get the core out. The outer braid slides right up to expose the meaty core, which then can be cut off. Bob Olson htmills@bright.net wrote:
Nada, Bob
If you e-mail it directly to me, I'll be glad to post in on my page for the list's enjoyment.
Tod
-----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com] On Behalf Of Bob Olson Sent: Monday, April 18, 2005 6:41 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Gel Coat Matching--picture
Third time I've tried to send this picture to the group. The list won't accept anything over 40k. Oh well, here's my original message...
Your wish is my command...
Here it is, propped up on nails so I could paint both sides at once. If you squint, you can see the sheen towards the back of the board. Amazing how the stuff flowed out. No thinner used.
And hey, I just found a Honda 2hp 4 stroke for $300. I think I must be livin' right.
Bob Olson
htmills@bright.net wrote:
pictures, Bob, pictures
-----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.co m] On Behalf Of Bob Olson Sent: Monday, April 18, 2005 4:16 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Gel Coat Matching
Or get this...Interlux Perfection, two part polyurethane.
http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scsto re+zk zt7270ffc9dec9+pr+ilxYHS070
The cream color is a perfect match to the Montgomery Gelcoat. Sticks to epoxy and polyester. High sheen. Goes on with a roller. Gets you high.
I just coated my centerboard with it. Went on smooth a silk and covered in one (thin) coat. Although, you need to watch the dust in the air.
--Bob Olson
M-15 #219 Sequel
http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scsto re+zk zt7270ffc9dec9+pr+ilxYHS070
Hughston, Larry wrote:
Thanks, will do. ---L
-----Original Message----- From: Wcpritchett@aol.com [mailto:Wcpritchett@aol.com] Sent: Saturday, April 16, 2005 4:44 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Gel Coat Matching
Ask the factory to sell you a pint for touchup. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Board looks great, Bob Glad to be of help with the pendant. ;-) Tod -----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com] On Behalf Of Bob Olson Sent: Monday, April 18, 2005 10:17 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Gel Coat Matching--picture link Here we go, a link...to my rebuilt M-15 centerboard. If anyone is interested in what they look like. http://www.users.qwest.net/~bobo4u/monty_pix.html I just scored a 1986 Honda 2hp so I didn't have time to post the centerboard picture before I left. To be honest, the shot makes the board look better than it is. I'd rate it an 8.5 on a ten scale--not quite new-looking. But the part that I repaired should be better than the original--durability wise. And the color is a dead-on match. I also bought a new pendant line today. If you buy the right stuff, it's a sinch to get the core out. The outer braid slides right up to expose the meaty core, which then can be cut off. Bob Olson htmills@bright.net wrote:
Nada, Bob
If you e-mail it directly to me, I'll be glad to post in on my page for the list's enjoyment.
Tod
-----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.co m] On Behalf Of Bob Olson Sent: Monday, April 18, 2005 6:41 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Gel Coat Matching--picture
Third time I've tried to send this picture to the group. The list won't accept anything over 40k. Oh well, here's my original message...
Your wish is my command...
Here it is, propped up on nails so I could paint both sides at once. If you squint, you can see the sheen towards the back of the board. Amazing how the stuff flowed out. No thinner used.
And hey, I just found a Honda 2hp 4 stroke for $300. I think I must be livin' right.
Bob Olson
htmills@bright.net wrote:
pictures, Bob, pictures
-----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.c o m] On Behalf Of Bob Olson Sent: Monday, April 18, 2005 4:16 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Gel Coat Matching
Or get this...Interlux Perfection, two part polyurethane.
http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scst o re+zk zt7270ffc9dec9+pr+ilxYHS070
The cream color is a perfect match to the Montgomery Gelcoat. Sticks to epoxy and polyester. High sheen. Goes on with a roller. Gets you high.
I just coated my centerboard with it. Went on smooth a silk and covered in one (thin) coat. Although, you need to watch the dust in the air.
--Bob Olson
M-15 #219 Sequel
http://www.pyacht.net/cgi-local/SoftCart.exe/cgi-bin/pagegen.pl?U+scst o re+zk zt7270ffc9dec9+pr+ilxYHS070
Hughston, Larry wrote:
Thanks, will do. ---L
-----Original Message----- From: Wcpritchett@aol.com [mailto:Wcpritchett@aol.com] Sent: Saturday, April 16, 2005 4:44 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Gel Coat Matching
Ask the factory to sell you a pint for touchup. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
participants (3)
-
Bob Olson -
htmills＠bright.net -
Hughston, Larry