Tom, the J24 tiller is 48". It has a nice shape to it and rides a little higher than the stock tiller, which is 36". Rich "Smith, Tom" wrote:

Rich, how long is the J24 tiller? I'll be very interested to hear how this mod works out for you... t

Tom Smith & Jane Van Winkle Sandpoint, Idaho M15-345, Chukar

-----Original Message----- From: rc2222@postoffice.pacbell.net [mailto:rc2222@postoffice.pacbell.net] Sent: Sunday, August 25, 2002 10:51 AM To: Montgomery Boats Subject: M_Boats: tiller

Connie:

I purchased a J24 tiller yesterday at West Marine for $ 50. They had it listed at $ 60. and they gave me 15% due to some sticky paper attached to it that shouldn't have been there. I have it temporarily set up and it looks like it will work just fine.

Now the hard part- sawing. Let's see. Measure once and cut twice.

I'll let you now how it works on San Francisco Bay within a couple weeks if I don't butcher it.

Rich Cottrell

_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats