Good morning all, So far it is looking like a nice start to September in this area (Ontario). We are heading to Lake Champlain for Labor Day weekend till later in the week. Then up to the Ottawa River at Arnprior. I have looked through the list archives searching for whisker pole info. Some references to the different types of poles (mostly Forespar). My question is how do I determine the vertical height on the mast to install a fitting to hold the inboard end? Has anyone a done this, or have a link to refer me to so I can calculate it? I am thinking to just put a single eye, instead of a short length of track. Thanks, Bill Wickett M17 #622
Griselda, my M17 has a track about 5 feet long mounted on the foreward side of the mast with a sliding, pin lock padeye. This allows the mounting point to be adjusted for any of my 4 jibs or the spinnaker pole. Set it where it works best. Whitebeard M17 #14, Griselda
Date: Wed, 2 Sep 2009 09:19:15 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Whisker pole mounting point on M17
Good morning all,
So far it is looking like a nice start to September in this area (Ontario). We are heading to Lake Champlain for Labor Day weekend till later in the week. Then up to the Ottawa River at Arnprior.
I have looked through the list archives searching for whisker pole info. Some references to the different types of poles (mostly Forespar). My question is how do I determine the vertical height on the mast to install a fitting to hold the inboard end? Has anyone a done this, or have a link to refer me to so I can calculate it? I am thinking to just put a single eye, instead of a short length of track.
Thanks,
Bill Wickett M17 #622 _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Windows Live: Keep your friends up to date with what you do online. http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON...
Do you fly a spinnaker as well? How do you store the poles? Vertical on the mast? Bill On Wed, Sep 2, 2009 at 9:53 AM, Ronnie Keeler <ronkeeler@hotmail.com> wrote:
Griselda, my M17 has a track about 5 feet long mounted on the foreward side of the mast with a sliding, pin lock padeye. This allows the mounting point to be adjusted for any of my 4 jibs or the spinnaker pole. Set it where it works best.
Whitebeard
M17 #14, Griselda
Date: Wed, 2 Sep 2009 09:19:15 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Whisker pole mounting point on M17
Good morning all,
So far it is looking like a nice start to September in this area (Ontario). We are heading to Lake Champlain for Labor Day weekend till later in the week. Then up to the Ottawa River at Arnprior.
I have looked through the list archives searching for whisker pole info. Some references to the different types of poles (mostly Forespar). My question is how do I determine the vertical height on the mast to install a fitting to hold the inboard end? Has anyone a done this, or have a link to refer me to so I can calculate it? I am thinking to just put a single eye, instead of a short length of track.
Thanks,
Bill Wickett M17 #622 _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Windows Live: Keep your friends up to date with what you do online.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON... _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
Both stored vertical on the mast. Whisker pole on one side and spinnaker pole (if carried) on the other. Whitebeard
Date: Wed, 2 Sep 2009 13:24:42 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Whisker pole mounting point on M17
Do you fly a spinnaker as well? How do you store the poles? Vertical on the mast?
Bill
On Wed, Sep 2, 2009 at 9:53 AM, Ronnie Keeler <ronkeeler@hotmail.com> wrote:
Griselda, my M17 has a track about 5 feet long mounted on the foreward side of the mast with a sliding, pin lock padeye. This allows the mounting point to be adjusted for any of my 4 jibs or the spinnaker pole. Set it where it works best.
Whitebeard
M17 #14, Griselda
Date: Wed, 2 Sep 2009 09:19:15 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Whisker pole mounting point on M17
Good morning all,
So far it is looking like a nice start to September in this area (Ontario). We are heading to Lake Champlain for Labor Day weekend till later in the week. Then up to the Ottawa River at Arnprior.
I have looked through the list archives searching for whisker pole info. Some references to the different types of poles (mostly Forespar). My question is how do I determine the vertical height on the mast to install a fitting to hold the inboard end? Has anyone a done this, or have a link to refer me to so I can calculate it? I am thinking to just put a single eye, instead of a short length of track.
Thanks,
Bill Wickett M17 #622 _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Windows Live: Keep your friends up to date with what you do online.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON... _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Hotmail® is up to 70% faster. Now good news travels really fast. http://windowslive.com/online/hotmail?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:W...
Bill, Busca has a fixed eye location about 16" above the base of the mast. I use a telescoping whisker pole on 80%, 109%, and 155% jibs. Tod Mills M17 #408, 1987 galley model BuscaBrisas
Can you describe the hardware you use where you connect the top end of the pole to the mast? Thanks, Joe Seafrog M17 ----- Original Message ----- From: "Ronnie Keeler" <ronkeeler@hotmail.com> To: "Montgomery boats mailing list" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, September 02, 2009 3:44 PM Subject: Re: M_Boats: Whisker pole mounting point on M17 Both stored vertical on the mast. Whisker pole on one side and spinnaker pole (if carried) on the other. Whitebeard
Date: Wed, 2 Sep 2009 13:24:42 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Whisker pole mounting point on M17
Do you fly a spinnaker as well? How do you store the poles? Vertical on the mast?
Bill
On Wed, Sep 2, 2009 at 9:53 AM, Ronnie Keeler <ronkeeler@hotmail.com> wrote:
Griselda, my M17 has a track about 5 feet long mounted on the foreward side of the mast with a sliding, pin lock padeye. This allows the mounting point to be adjusted for any of my 4 jibs or the spinnaker pole. Set it where it works best.
Whitebeard
M17 #14, Griselda
Date: Wed, 2 Sep 2009 09:19:15 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Whisker pole mounting point on M17
Good morning all,
So far it is looking like a nice start to September in this area (Ontario). We are heading to Lake Champlain for Labor Day weekend till later in the week. Then up to the Ottawa River at Arnprior.
I have looked through the list archives searching for whisker pole info. Some references to the different types of poles (mostly Forespar). My question is how do I determine the vertical height on the mast to install a fitting to hold the inboard end? Has anyone a done this, or have a link to refer me to so I can calculate it? I am thinking to just put a single eye, instead of a short length of track.
Thanks,
Bill Wickett M17 #622 _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Windows Live: Keep your friends up to date with what you do online.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON... _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Hotmail® is up to 70% faster. Now good news travels really fast. http://windowslive.com/online/hotmail?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:W... _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats Remember, there is no privacy on the Internet!
I use a padeye on the mast at the top for the spinn pole and a clip at the bottom. I collapse the whisker pole and attach it to the movable padeye on top and a clip at the bottom. I then put a bungee around the bottom of the mast as a precaution. I usually single hand so, don't use the spinaker unless I have a hearty young crew so, the spinn gear is usually left ashore. One of my jibs has a very high clew and the 150 Genoa is a deck sweeper so, the adjustable padeye is great. Whitebeard
From: seagray@embarqmail.com To: montgomery_boats@mailman.xmission.com Date: Wed, 2 Sep 2009 17:19:35 -0400 Subject: Re: M_Boats: Whisker pole mounting point on M17
Can you describe the hardware you use where you connect the top end of the pole to the mast? Thanks, Joe Seafrog M17 ----- Original Message ----- From: "Ronnie Keeler" <ronkeeler@hotmail.com> To: "Montgomery boats mailing list" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, September 02, 2009 3:44 PM Subject: Re: M_Boats: Whisker pole mounting point on M17
Both stored vertical on the mast. Whisker pole on one side and spinnaker pole (if carried) on the other.
Whitebeard
Date: Wed, 2 Sep 2009 13:24:42 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Whisker pole mounting point on M17
Do you fly a spinnaker as well? How do you store the poles? Vertical on the mast?
Bill
On Wed, Sep 2, 2009 at 9:53 AM, Ronnie Keeler <ronkeeler@hotmail.com> wrote:
Griselda, my M17 has a track about 5 feet long mounted on the foreward side of the mast with a sliding, pin lock padeye. This allows the mounting point to be adjusted for any of my 4 jibs or the spinnaker pole. Set it where it works best.
Whitebeard
M17 #14, Griselda
Date: Wed, 2 Sep 2009 09:19:15 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Whisker pole mounting point on M17
Good morning all,
So far it is looking like a nice start to September in this area (Ontario). We are heading to Lake Champlain for Labor Day weekend till later in the week. Then up to the Ottawa River at Arnprior.
I have looked through the list archives searching for whisker pole info. Some references to the different types of poles (mostly Forespar). My question is how do I determine the vertical height on the mast to install a fitting to hold the inboard end? Has anyone a done this, or have a link to refer me to so I can calculate it? I am thinking to just put a single eye, instead of a short length of track.
Thanks,
Bill Wickett M17 #622 _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Windows Live: Keep your friends up to date with what you do online.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON... _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Hotmail® is up to 70% faster. Now good news travels really fast. http://windowslive.com/online/hotmail?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:W... _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Get back to school stuff for them and cashback for you. http://www.bing.com/cashback?form=MSHYCB&publ=WLHMTAG&crea=TEXT_MSHYCB_BackT...
Thanks to everyone who contributed to the whisker pole discussion. Hmmmm track or just ring.... I have it on my growing list. May wait till the winter boat show. Will price things now, and compare then. Some of the show deals are no deal. Julie and I looked through Sean's San Juan slideshows on YouTube tonight and saw a number of whisker poles, bimini's and rain/shade canopies on the 17s on that cruise. Lots of great ideas!! Loading for Lake Champlain tomorrow, heading out Friday am dark and early to beat the morning traffic heading across Toronto. Thanks again. Bill Wickett M17 #622 On Wed, Sep 2, 2009 at 6:23 PM, Ronnie Keeler <ronkeeler@hotmail.com> wrote:
I use a padeye on the mast at the top for the spinn pole and a clip at the bottom. I collapse the whisker pole and attach it to the movable padeye on top and a clip at the bottom. I then put a bungee around the bottom of the mast as a precaution. I usually single hand so, don't use the spinaker unless I have a hearty young crew so, the spinn gear is usually left ashore. One of my jibs has a very high clew and the 150 Genoa is a deck sweeper so, the adjustable padeye is great.
Whitebeard
From: seagray@embarqmail.com To: montgomery_boats@mailman.xmission.com Date: Wed, 2 Sep 2009 17:19:35 -0400 Subject: Re: M_Boats: Whisker pole mounting point on M17
Can you describe the hardware you use where you connect the top end of the pole to the mast? Thanks, Joe Seafrog M17 ----- Original Message ----- From: "Ronnie Keeler" <ronkeeler@hotmail.com> To: "Montgomery boats mailing list" < montgomery_boats@mailman.xmission.com> Sent: Wednesday, September 02, 2009 3:44 PM Subject: Re: M_Boats: Whisker pole mounting point on M17
Both stored vertical on the mast. Whisker pole on one side and spinnaker pole (if carried) on the other.
Whitebeard
Date: Wed, 2 Sep 2009 13:24:42 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Whisker pole mounting point on M17
Do you fly a spinnaker as well? How do you store the poles? Vertical on the mast?
Bill
On Wed, Sep 2, 2009 at 9:53 AM, Ronnie Keeler <ronkeeler@hotmail.com> wrote:
Griselda, my M17 has a track about 5 feet long mounted on the
foreward
side of the mast with a sliding, pin lock padeye. This allows the mounting point to be adjusted for any of my 4 jibs or the spinnaker pole. Set it where it works best.
Whitebeard
M17 #14, Griselda
Date: Wed, 2 Sep 2009 09:19:15 -0400 From: billwick@gmail.com To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Whisker pole mounting point on M17
Good morning all,
So far it is looking like a nice start to September in this area (Ontario). We are heading to Lake Champlain for Labor Day weekend till later in the week. Then up to the Ottawa River at Arnprior.
I have looked through the list archives searching for whisker pole info. Some references to the different types of poles (mostly Forespar). My question is how do I determine the vertical height on the mast to install a fitting to hold the inboard end? Has anyone a done this, or have a link to refer me to so I can calculate it? I am thinking to just put a single eye, instead of a short length of track.
Thanks,
Bill Wickett M17 #622 _______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Windows Live: Keep your friends up to date with what you do online.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON...
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Hotmail® is up to 70% faster. Now good news travels really fast.
http://windowslive.com/online/hotmail?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:W...
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_________________________________________________________________ Get back to school stuff for them and cashback for you.
http://www.bing.com/cashback?form=MSHYCB&publ=WLHMTAG&crea=TEXT_MSHYCB_BackT... _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
Bill, I just bought a Forespar 6-12, which comes with a mounting pad for the mast, and place it by eyeball at a point where it was roughly level when the genoa was poled out. I didn't measure precisely where it was, but from my research it doesn't seem to be too critical within a few inches. The genoa clew will move up and down depending on the sheet angle and tension anyway. Rick M-17 #633 Lynne L On Wed, Sep 2, 2009 at 9:19 AM, Bill Wickett <billwick@gmail.com> wrote:
Good morning all,
So far it is looking like a nice start to September in this area (Ontario). We are heading to Lake Champlain for Labor Day weekend till later in the week. Then up to the Ottawa River at Arnprior.
I have looked through the list archives searching for whisker pole info. Some references to the different types of poles (mostly Forespar). My question is how do I determine the vertical height on the mast to install a fitting to hold the inboard end? Has anyone a done this, or have a link to refer me to so I can calculate it? I am thinking to just put a single eye, instead of a short length of track.
Thanks,
Bill Wickett M17 #622 _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
Thanks Rick. I thought it might be an eyeball situation. I hadn't thought about the change in height due to sheeting. Bill On Wed, Sep 2, 2009 at 12:58 PM, Rick Davies <jdavies104@gmail.com> wrote:
Bill,
I just bought a Forespar 6-12, which comes with a mounting pad for the mast, and place it by eyeball at a point where it was roughly level when the genoa was poled out. I didn't measure precisely where it was, but from my research it doesn't seem to be too critical within a few inches. The genoa clew will move up and down depending on the sheet angle and tension anyway.
Rick M-17 #633 Lynne L
On Wed, Sep 2, 2009 at 9:19 AM, Bill Wickett <billwick@gmail.com> wrote:
Good morning all,
So far it is looking like a nice start to September in this area (Ontario). We are heading to Lake Champlain for Labor Day weekend till later in the week. Then up to the Ottawa River at Arnprior.
I have looked through the list archives searching for whisker pole info. Some references to the different types of poles (mostly Forespar). My question is how do I determine the vertical height on the mast to install a fitting to hold the inboard end? Has anyone a done this, or have a link to refer me to so I can calculate it? I am thinking to just put a single eye, instead of a short length of track.
Thanks,
Bill Wickett M17 #622 _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
participants (5)
-
Bill Wickett -
htmills＠zoominternet.net -
Joe Murphy -
Rick Davies -
Ronnie Keeler