After adding a new rudder blade, refinishing the tiller and adding even more varnish to the new blade, the rudder assembly still look less than wonderful because the aluminum cheeks paint (flat black) is chipped off in places. Have any of you re-painted this? I have heard that certain paints can cause problems with aluminum, so am asking for paints and procedure tips. Thanks as usual for everyone's kind sharing!! *Jeff Johnston+* Molōn labe!
Hi Jeff I would have them Powder Coated. Call around your area. Not that expensive. Bob
Date: Fri, 20 Apr 2012 12:07:46 -0500 From: frjeff@gmail.com To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Rudder Assembly Cheeks
After adding a new rudder blade, refinishing the tiller and adding even more varnish to the new blade, the rudder assembly still look less than wonderful because the aluminum cheeks paint (flat black) is chipped off in places.
Have any of you re-painted this? I have heard that certain paints can cause problems with aluminum, so am asking for paints and procedure tips.
Thanks as usual for everyone's kind sharing!!
*Jeff Johnston+* MolÃ˛n labe!
jeff: the cheeks are (were) black anodized. :: Dave Scobie :: former M15 owner - www.freewebs.com/m15-named-scred :: M17 #375 SWEET PEA - www.m17-375.webs.com :: Sage Marine - www.sagemarine.com --- On Fri, 4/20/12, Jeffrey Johnston <frjeff@gmail.com> wrote:
After adding a new rudder blade, refinishing the tiller and adding even more varnish to the new blade, the rudder assembly still look less than wonderful because the aluminum cheeks paint (flat black) is chipped off in places.
Have any of you re-painted this? I have heard that certain paints can cause problems with aluminum, so am asking for paints and procedure tips.
Thanks as usual for everyone's kind sharing!!
*Jeff Johnston+* Molōn labe!
Jeff- what year is your 15? jerry ----- Original Message ----- From: "Jeffrey Johnston" <frjeff@gmail.com> To: <montgomery_boats@mailman.xmission.com> Sent: Friday, April 20, 2012 10:07 AM Subject: M_Boats: Rudder Assembly Cheeks After adding a new rudder blade, refinishing the tiller and adding even more varnish to the new blade, the rudder assembly still look less than wonderful because the aluminum cheeks paint (flat black) is chipped off in places. Have any of you re-painted this? I have heard that certain paints can cause problems with aluminum, so am asking for paints and procedure tips. Thanks as usual for everyone's kind sharing!! *Jeff Johnston+* Molōn labe! -- I am using the free version of SPAMfighter. We are a community of 7 million users fighting spam. SPAMfighter has removed 6387 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len The Professional version does not have this message
1981 # 176 Jeff On Fri, Apr 20, 2012 at 12:29 PM, jerry montgomery < jerry@jerrymontgomery.org> wrote:
Jeff- what year is your 15?
jerry ----- Original Message ----- From: "Jeffrey Johnston" <frjeff@gmail.com> To: <montgomery_boats@mailman.**xmission.com<montgomery_boats@mailman.xmission.com>
Sent: Friday, April 20, 2012 10:07 AM
Subject: M_Boats: Rudder Assembly Cheeks
After adding a new rudder blade, refinishing the tiller and adding even more varnish to the new blade, the rudder assembly still look less than wonderful because the aluminum cheeks paint (flat black) is chipped off in places.
Have any of you re-painted this? I have heard that certain paints can cause problems with aluminum, so am asking for paints and procedure tips.
Thanks as usual for everyone's kind sharing!!
*Jeff Johnston+* Molōn labe!
-- I am using the free version of SPAMfighter. We are a community of 7 million users fighting spam. SPAMfighter has removed 6387 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
-- *Jeff+* Molōn labe!
For a short time, about then (1981) I had a batch of rudder plates powder coated instead of the much better hard black anodizing, (also some castings) and they chipped badly. I'd suggest hard black if there is someone around to do it, or you migjht hit up Dave Scobie to see if jhe could run them with a batch of Sage plates. It might cost you some time, but save a LOT of money. Second best would be to clean them up and sand them, coat them with epoxy primer then 2-part polyurethane paint. Powdercoating CAN be really good, but usually isn't. Things that get banged around in a saltwater environment are pretty tough on paints. Maybe Stan will chip in on which paint to use if he isn't in a bar someplace, across the tracks. jerry ----- Original Message ----- From: "Jeffrey Johnston" <frjeff@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Friday, April 20, 2012 10:31 AM Subject: Re: M_Boats: Rudder Assembly Cheeks 1981 # 176 Jeff On Fri, Apr 20, 2012 at 12:29 PM, jerry montgomery < jerry@jerrymontgomery.org> wrote:
Jeff- what year is your 15?
jerry ----- Original Message ----- From: "Jeffrey Johnston" <frjeff@gmail.com> To: <montgomery_boats@mailman.**xmission.com<montgomery_boats@mailman.xmission.com>
Sent: Friday, April 20, 2012 10:07 AM
Subject: M_Boats: Rudder Assembly Cheeks
After adding a new rudder blade, refinishing the tiller and adding even more varnish to the new blade, the rudder assembly still look less than wonderful because the aluminum cheeks paint (flat black) is chipped off in places.
Have any of you re-painted this? I have heard that certain paints can cause problems with aluminum, so am asking for paints and procedure tips.
Thanks as usual for everyone's kind sharing!!
*Jeff Johnston+* Molōn labe!
-- I am using the free version of SPAMfighter. We are a community of 7 million users fighting spam. SPAMfighter has removed 6387 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
-- *Jeff+* Molōn labe!
jeff: i am about to send a batch of Sage 17 rudder cheek plates to be anodized give me a call, 800-621-1065, if you are interested. :: Dave Scobie :: Sage Marine --- On Fri, 4/20/12, jerry montgomery <jerry@jerrymontgomery.org> wrote:
For a short time, about then (1981) I had a batch of rudder plates powder coated instead of the much better hard black anodizing, (also some castings) and they chipped badly. I'd suggest hard black if there is someone around to do it, or you migjht hit up Dave Scobie to see if jhe could run them with a batch of Sage plates. It might cost you some time, but save a LOT of money.
Second best would be to clean them up and sand them, coat them with epoxy primer then 2-part polyurethane paint. Powdercoating CAN be really good, but usually isn't. Things that get banged around in a saltwater environment are pretty tough on paints. Maybe Stan will chip in on which paint to use if he isn't in a bar someplace, across the tracks.
jerry ----- Original Message ----- From: "Jeffrey Johnston" <frjeff@gmail.com> Sent: Friday, April 20, 2012 10:31 AM
1981 # 176
Jeff
On Fri, Apr 20, 2012 at 12:29 PM, jerry montgomery < jerry@jerrymontgomery.org> wrote:
Jeff- what year is your 15?
jerry ----- Original Message ----- From: "Jeffrey Johnston" <frjeff@gmail.com> To: <montgomery_boats@mailman.**xmission.com<montgomery_boats@mailman.xmission.com>
Sent: Friday, April 20, 2012 10:07 AM
Subject: M_Boats: Rudder Assembly Cheeks
After adding a new rudder blade, refinishing the tiller and adding even more varnish to the new blade, the rudder assembly still look less than wonderful because the aluminum cheeks paint (flat black) is chipped off in places.
Have any of you re-painted this? I have heard that certain paints can cause problems with aluminum, so am asking for paints and procedure tips.
Thanks as usual for everyone's kind sharing!!
*Jeff Johnston+* Molōn labe!
Dave, Thanks, but, I think I'll sail her this year as is (it isn't that bad), and worry about that project next Fall or Winter. Maybe I'll check back with you during those seasons. Jeff Johnston On Fri, Apr 20, 2012 at 1:03 PM, W David Scobie <wdscobie@yahoo.com> wrote:
jeff:
i am about to send a batch of Sage 17 rudder cheek plates to be anodized
give me a call, 800-621-1065, if you are interested.
:: Dave Scobie :: Sage Marine
--- On Fri, 4/20/12, jerry montgomery <jerry@jerrymontgomery.org> wrote:
For a short time, about then (1981) I had a batch of rudder plates powder coated instead of the much better hard black anodizing, (also some castings) and they chipped badly. I'd suggest hard black if there is someone around to do it, or you migjht hit up Dave Scobie to see if jhe could run them with a batch of Sage plates. It might cost you some time, but save a LOT of money.
Second best would be to clean them up and sand them, coat them with epoxy primer then 2-part polyurethane paint. Powdercoating CAN be really good, but usually isn't. Things that get banged around in a saltwater environment are pretty tough on paints. Maybe Stan will chip in on which paint to use if he isn't in a bar someplace, across the tracks.
jerry ----- Original Message ----- From: "Jeffrey Johnston" <frjeff@gmail.com> Sent: Friday, April 20, 2012 10:31 AM
1981 # 176
Jeff
On Fri, Apr 20, 2012 at 12:29 PM, jerry montgomery < jerry@jerrymontgomery.org> wrote:
Jeff- what year is your 15?
jerry ----- Original Message ----- From: "Jeffrey Johnston" <frjeff@gmail.com> To: <montgomery_boats@mailman.**xmission.com<
montgomery_boats@mailman.xmission.com>
Sent: Friday, April 20, 2012 10:07 AM
Subject: M_Boats: Rudder Assembly Cheeks
After adding a new rudder blade, refinishing the tiller and adding even more varnish to the new blade, the rudder assembly still look less than wonderful because the aluminum cheeks paint (flat black) is chipped off in places.
Have any of you re-painted this? I have heard that certain paints can cause problems with aluminum, so am asking for paints and procedure tips.
Thanks as usual for everyone's kind sharing!!
*Jeff Johnston+* Molōn labe!
-- *Jeff+* Molōn labe!
participants (4)
-
Bob Eeg -
Jeffrey Johnston -
jerry montgomery -
W David Scobie