Re: M_Boats: M-17 aux. motor, M-17 for sale
Hi Listers, I had a Johnson 6hp on my M-17, and I have replaced it with a Yamaha 4hp 4 stroke. Seems to have ample power and easy on gas. There is a bit more vibration with the single cylinder. The M-23 has a 10 hp Honda 4 stroke. On another note, there was a 86 M-17 listed in the Mpls classifieds last Sunday, with motor and trailer. $6000.00 B/O. I have NOT seen it. 651-429-6331. Later, Bones ________________________________________________________________ The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today!
Those of you who have old M17's with cast-iron centerboards: What is the thickness of the cast-iron board? Thanks!
Hello The centerboard thickness (before corrosion) is .75 inch Mark Escovedo M17 F/D #103 "Chunky Dory" ----- Original Message ----- From: Honshells<mailto:chonshell@ia4u.net> To: For and about Montgomery Sailboats<mailto:montgomery_boats@mailman.xmission.com> Sent: Wednesday, May 05, 2004 8:58 PM Subject: M_Boats: centerboard (again!) Those of you who have old M17's with cast-iron centerboards: What is the thickness of the cast-iron board? Thanks! _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats<http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats>
Thanks Mark! --Craig ----- Original Message ----- From: "Mark Escovedo" <marinermanm17@msn.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Thursday, May 06, 2004 1:51 AM Subject: centerboard (again!) Hello The centerboard thickness (before corrosion) is .75 inch Mark Escovedo M17 F/D #103 "Chunky Dory" ----- Original Message ----- From: Honshells<mailto:chonshell@ia4u.net> To: For and about Montgomery Sailboats<mailto:montgomery_boats@mailman.xmission.com> Sent: Wednesday, May 05, 2004 8:58 PM Subject: centerboard (again!) Those of you who have old M17's with cast-iron centerboards: What is the thickness of the cast-iron board? Thanks!
3/4" On 5/5/04 10:58 PM, "Honshells" <chonshell@ia4u.net> wrote:
Those of you who have old M17's with cast-iron centerboards: What is the thickness of the cast-iron board?
Thanks!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
I think it's 7/8 Jerry ----- Original Message ----- From: "Honshells" <chonshell@ia4u.net> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, May 05, 2004 8:58 PM Subject: M_Boats: centerboard (again!)
Those of you who have old M17's with cast-iron centerboards: What is the
thickness of the cast-iron board?
Thanks!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
On 5/6/04 9:48 PM, "Jerry Montgomery" <jmbn@innercite.com> wrote:
I think it's 7/8
Jerry ----- Original Message ----- From: "Honshells" <chonshell@ia4u.net> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, May 05, 2004 8:58 PM Subject: M_Boats: centerboard (again!)
Those of you who have old M17's with cast-iron centerboards: What is the
thickness of the cast-iron board?
Thanks!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boatsWhen Would a 1986 M17 have a cast iron centerboard or fiberglass, what about the thru hulls are they aluminum? Thanks Irv
Thanks Jerry. --Craig ----- Original Message ----- From: "Jerry Montgomery" <jmbn@innercite.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Thursday, May 06, 2004 9:48 PM Subject: centerboard (again!) I think it's 7/8 Jerry ----- Original Message ----- From: "Honshells" <chonshell@ia4u.net> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, May 05, 2004 8:58 PM Subject: centerboard (again!) Those of you who have old M17's with cast-iron centerboards: What is the thickness of the cast-iron board? Thanks!
participants (6)
-
bownez＠juno.com -
Honshells -
Howard Audsley -
Irvin H. Kooris -
Jerry Montgomery -
Mark Escovedo