Has anyone tried Poly-Glo on a Monty? How did it work? Is it difficult to apply to lapstrake? I've been thinking of trying it, but would like to get some advice before I start. Thanks Rick M17 #633 Lynne L
I have used it with VERY good results, not on a Montgomery though. -----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Rick Davies Sent: Friday, March 02, 2012 5:11 PM To: M BoatsForum Subject: M_Boats: poli-glo Has anyone tried Poly-Glo on a Monty? How did it work? Is it difficult to apply to lapstrake? I've been thinking of trying it, but would like to get some advice before I start. Thanks Rick M17 #633 Lynne L
Yes, I have applied Poli-Glow to Busca, starting in 2004. I would say that yes, the lapstrakes do make it a little more difficult to apply, but not too bad. Here is a pic: http://www.peppypawspoochpark.com/htmills/images/NC04a01-PGlowShine.jpg I'm happy with it. Tod
-----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Rick Davies Sent: Friday, March 02, 2012 5:11 PM To: M BoatsForum Subject: M_Boats: poli-glo
Has anyone tried Poly-Glo on a Monty? How did it work? Is it difficult to apply to lapstrake? I've been thinking of trying it, but would like to get some advice before I start.
Thanks
Rick M17 #633 Lynne L
Tod, August, You have got me inspired. Thanks for the encouragement. Beautiful job, Tod. Rick M17 #633 Lynne L On Fri, Mar 2, 2012 at 6:58 PM, Tod <htmills@zoominternet.net> wrote:
Yes, I have applied Poli-Glow to Busca, starting in 2004.
I would say that yes, the lapstrakes do make it a little more difficult to apply, but not too bad.
Here is a pic: http://www.peppypawspoochpark.com/htmills/images/NC04a01-PGlowShine.jpg
I'm happy with it.
Tod
-----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Rick Davies Sent: Friday, March 02, 2012 5:11 PM To: M BoatsForum Subject: M_Boats: poli-glo
Has anyone tried Poly-Glo on a Monty? How did it work? Is it difficult to apply to lapstrake? I've been thinking of trying it, but would like to get some advice before I start.
Thanks
Rick M17 #633 Lynne L
Rick, Practical Sailor has a really nice write up comparing Acrylic finishes with lots of information about Acrylics application and when and where they are best used. The article is in their September 2009 edition. They rated Poliglow highest among the competitors. In general, this looks like a good approach for really old boats like my 1978 M-23. The Acrylics fill the deeper pores on severely oxidized hulls which probably applies to mine even though it does not look too bad because it is cream/off white. I noticed the brown sheer stripe reverted to looking pretty faded not long after buffing out, polishing and waxing so at the very least it may be good to try on the colored parts of my hull. Robbin On 3/2/2012 5:11 PM, Rick Davies wrote:
Has anyone tried Poly-Glo on a Monty? How did it work? Is it difficult to apply to lapstrake? I've been thinking of trying it, but would like to get some advice before I start.
Thanks
Rick M17 #633 Lynne L
participants (4)
-
August Trometer -
Rick Davies -
Robbin Roddewig -
Tod