Thanks Sean - I have sent the photos to Pacific and will let them weigh in. Todd Bradley M-23 Ce Cee #86 -----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Nebwest2@aol.com Sent: Tuesday, August 13, 2013 5:46 PM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Pacific Trailer for a 23' -might be fals alarm but... On further checking.... The other 23's trailer that is posted...is the same as mine....straight axle...squared up frame. Upon looking at yours more...you have an axle with a drop section in the middle and your uprights for the keel guides are different from both of these also....your frame's crossmembers appear not to be curved as I first thought. But there has obviously been some changes made...so whether these older trailer's measurements are relevant is something I could not tell ya. I would call Pacific and get their input until you get satisfaction. You bought a trailer for a hull known to them....they should be able to figure out what is wrong.