Jon, I wish I had the answer. The pin in my M15 is flush with both sides of the keel. I do not know if it is the original pin and for some reason I doubt that it is. I have had repeated problems keeping the pin in and I would rather not put a bolt in but I am coming close. I tried 4200 - it crept out very quickly. I glassed it over and it lasted about 3 trips and broke out the fiber glass. I covered the pin on both sides with really sticky, strong clear sail repair tape and this worked well for a while but the pin then started punching through the tape! I recently took a spare pin and cut off 1/4 inch to get the pin recessed so the epoxy would have more bight. I have epoxied it in but haven't had the boat out yet. Thanks Doug "M15 #310 --- Jon Martin <jonmartin666@msn.com> wrote:

I would appreciate any rexomendations for sealing the centerboard pivot pin on an M15 -thanks, in advance, Jon Martin

_________________________________________________________________

Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail

_______________________________________________

http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com