Two solutions to the porta-potty. 1) I switched to a dry toilet - http://www.thepett.com/index.php?PageLayout=PRODUCTS&headerID2=36&pageID=98 I am very happy with and it frees up some space.  It is not as convienient as a ready to use porta potti as it takes 2 minutes to set it up for each use. 2) search the list archives for how to shrink the base.  If  I recall it as simples as filling the bottom with boiling water and the sitting on it.  The bottom will get soft and mold itself to the shape of the hole.  You have to use the new Theford to make sure it is not too high and is a close fit to the hole. As to a battery, I have heard of a couple of people using motorcycle batteries and for the limited use you have in mind they work quite well. Just make sure it't a 12 volt battery. Thanks Doug Kelch --- On Sat, 4/18/09, Lou <capnlou@ec.rr.com> wrote: From: Lou <capnlou@ec.rr.com> Subject: M_Boats: Porta-Potti and Battery... To: montgomery_boats@mailman.xmission.com Date: Saturday, April 18, 2009, 7:37 PM I'm trying to find a Porta-Potti and battery for my M-15. The little hold that was designed to hold a the Potti is only 11 1/2" by 15" on my boat and I'm wondering where I can find a potti that will fit that space. I checked out some other M-15s on line and saw the Thetford 235 model being used, however the dimensions for the 235 and 135 models are larger than that hold acording to the manufacturer. Can someone please advise me... I also need a battery to run my depth finder and eventually some lights. I would like to avoid using a big heavy battery. Does anyone have any experience in this area? Thanks, Lou Aliotta _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats Remember, there is no privacy on the Internet!

Lou, I was faced with the same dilemma re the PP. The dimensions of the molded PP well in my M15 didn't seem to match those of any unit on the market. However, in checking the Thetford 135, I noticed the base of that model is slightly tapered and will fit the space...albeit snugly. But, that's what I want, a PP that is not easily dislodged. Mike La Pequenita, M15, #654 -----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Lou Sent: Saturday, April 18, 2009 5:38 PM To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Porta-Potti and Battery... I'm trying to find a Porta-Potti and battery for my M-15. The little hold that was designed to hold a the Potti is only 11 1/2" by 15" on my boat and I'm wondering where I can find a potti that will fit that space. I checked out some other M-15s on line and saw the Thetford 235 model being used, however the dimensions for the 235 and 135 models are larger than that hold acording to the manufacturer. Can someone please advise me... I also need a battery to run my depth finder and eventually some lights. I would like to avoid using a big heavy battery. Does anyone have any experience in this area? Thanks, Lou Aliotta _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats Remember, there is no privacy on the Internet!