Craig, I use COPPER ANTI-SIEZE lubricant from Permatex. It has worked well so far but I haven't been using it long enough to claim a good test. The stainless screws have been in the aluminum boom for 2 1/2 years - so far no signs of corosion. Thanks Doug --- "Craig F. Honshell" <chonshell@ia4u.net> wrote:
I'm assuming you use that stuff on the threads to prevent galvanic corrosion, right Doug? What do you use? Thanks, Craig
----- Original Message ----- From: Doug Kelch To: For and about Montgomery Sailboats Sent: Friday, July 29, 2005 4:20 PM Subject: RE: M_Boats: Jiffy reefing system
Sandra,
Tod has the link correct. I did not install the cheek block in the picture. I did put the pad eye in front of the cheek block in for the second reef point. I do not use pop rivets. I use self taping stainless steel screws with a corosion preventing grease on the threads.
Thanks
Doug Kelch
--- htmills@bright.net wrote:
Sandra,
Perhaps you are thinking of Doug Kelch's funtigo site?
http://www.funtigo.com/dkelch?b=215326&p=start&c=1802951
Tod
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com