HAD......had one......couldn't find anything redeeming in it so I removed it. Am possibly going to incorporate the tubing from it into the mounting base for my windvane (if I ever get it done) Tod -----Original Message----- From: montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com [mailto:montgomery_boats-bounces+htmills=bright.net@mailman.xmission.com] On Behalf Of Honshells Sent: Tuesday, February 24, 2004 11:24 PM To: MC; montgomery_boats@mailman.xmission.com Subject: M_Boats: M17 IN GARAGE Depends on the height of the stern rail . . . I'm pretty sure Tod Mills' Busca has one, and he has the normal M17 rudder configuration . . . The tiller complicates a stern TRAVELER of normal height, but a traveler mounted up on a stern rail that's high enough to clear the tiller in the "rudder up" position should work fine . . . ----- Original Message ----- From: "MC" <southisland2@earthlink.net> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com>; "Wayne Yeargain" <saltydog@ev1.net> Sent: Tuesday, February 24, 2004 10:21 PM Subject: M17 IN GARAGE I tried to get information on the stern rail last summer when I was in town and I was told it was not possible because of the raising of the tiller ( rudder) but I don't see that as a problem. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats