Jeff, On the rudder: Don't know of and can't imagine a situation where an asymmetrical rudder would really give an advantage. I can tell you that once you get your rudder back to being symmetrical, it will straighten your uneven helm problem right out. Had the same thing on our M-15. Rudder was almost flat on one side. Steering was very obviously uneven. Got a new rudder from Bob .... what a difference. Rik Will Rogers often said, "There's nothing quite like money in the bank." He went on to say, "I'm not so concerned about the return on my money as I am about the return of my money." Chris and Jeff Packer wrote:
Does anyone have mylar sails? My 170 genoa began to delaminate on the top panel this summer after it took a fairly good gust of wind. The mylar film seperated from the cloth after the film gave way at a seam. The exposed sides are quite sticky. The area is not that large and the rest of the sail looks good. Anyone know if this can be fixed? Someone mentioned the possibility of using an iron with some kind of tape at the seam. Its a nice light air sail (1.9 oz material). Any suggestions?
Another rather odd question that borders on my own stupidity for even asking it... After launching my M23 this summer, I noticed the rudder pulled to one side quite hard while under power. Upon closer inspection, I noticed the shape of the rudder below the water line is fairly flat on one side and very concave on the other. I immediately concluded that the mahogany rudder had warped distorting the shape. Upon showing a woodworker friend of mine he said to me: "It looks like it was made that way!" I thought... no way, why would anyone make an unbalanced rudder. I have since looked at it again and it is a straight piece of mahogany above the waterline where it has not been faired. Then it looks like it has been faired into an airplane wing (almost flat on one side, very concave on the other) below the waterline. The boat was set up for racing, but it seems to me that any advantage you might gain from such a shape on one tack, would be totally negated on the other tack. Hence I have had more weather helm on one tack and at times lee helm on the other tack. So my stupid question is: Can anyone think of a valid reason that a rudder might have been built that way on purpose? Or is it just a cleverly disguised warped rudder? To get it symmetrical, I will have to do some serious planing losing inches off the trailing edge that will have to be built back up using epoxy and fiberglass. Even if there is a reason for it... I'm quite certain that it is not for me. Just curious about any thoughts/opinions.
Jeff M23 Clarity _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats