No boomends, but you don't really need an end. That was a Sparcraft 102 sect; been gone for 30 years! -----Original Message----- From: Dave Scobie Sent: Sunday, May 06, 2018 8:43 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Montgomery Specific parts. Dan. Need to see if Jerry has any old boomends laying around. The boom, like the mast, for the old boats is no longer available. How badly is it broken? Picture will help in diagnosis of solutions. :: Dave Scobie On Sun, May 6, 2018, 8:40 PM Dan Farrell <msog@danf.us> wrote:
Seem to have missed the key word - I need to replace the gooseneck casting for my boom.
Dan Farrell M17 #301
Dan Farrell <msog@danf.us> wrote:
Hi all,
Jerry - and everyone else - can you help me identify the section used for a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive.
Any input will be most appreciated.
Thanks,
Dan Farrell M17 #301
jerry@jerrymontgomery.org wrote:
Kevin- It looks like you have one of the 400-some 17's that I made, which don't have too much in common with the eeg-built boats except that they came out of the same molds. If you can be more specific about what parts you need, between Dave, Sage marine, and I, we can probably help.
-----Original Message----- From: Dave Scobie Sent: Sunday, May 06, 2018 1:01 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Montgomery Specific parts.
Kevin.
Most if your boat hardware is Schaefer or Garhauer. There are some custom parts, cleats for example, you need to find an equivalent. Jerry, jerry@jerrymontgomery.org, still has a few of the custom parts.
:: Dave Scobie
On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick@hotmail.com> wrote:
Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10