I has to make the multi angled block to keep my stern light horizontal so as not to have the top of it block a lot of light going out the back of the boat. I have seen flat mounted 180degree lights on newer models of Montys so maybe it would be easier for you to get one of those and mount it on the transom and just close up the hole in the aft sloping end of your port coaming. <https://www.avast.com/sig-email> This email has been sent from a virus-free computer protected by Avast. www.avast.com <https://www.avast.com/sig-email> <#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Thu, Feb 4, 2016 at 9:41 PM, John Schinnerer <john@eco-living.net> wrote:
On 02/04/2016 09:09 AM, Thomas Buzzi wrote:
... Also very handy for dealing with the aft running lite or when adding wiring for an auto helm.
Speaking of stern light - my M17 has the standard Perko dome style light installed on the downward slope of the port side coaming where it drops down to the transom. But it was just mounted flat on the slope, meaning it's tilted quite steeply. The solid part of the dome blocks a lot of the light astern (problematic, for a stern light!).
Some of the pictures shared recently about other things (like rudders) included a view of same light in same place, but with a nice wood wedge under the light so it sits level with respect to the horizon.
For those who have something like that for their stern light - was it something you bought, or did you make it or have it made, one-off?
I want to level my light in same way so wondering if there's something ready-made or I'll need to make it.
thanks, John S.
-- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john@eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com