I think this is all documented in the archives. I originally tooled the 15 for an exact fit for the PP35. vA few years later Thetford dropped the 35, replacing it with the 135. I bought all the 35's that I could find in the pipeline, and when they ran out I retooled the mold to fit the 135. I have fit 135's to the 35 bases using a hair dryer, and others have done it using hot water. In both cases patience and a beer in hand are helpful. jerry ----- Original Message ----- From: "Lou" <capnlou@ec.rr.com> To: <montgomery_boats@mailman.xmission.com> Sent: Monday, April 20, 2009 6:34 AM Subject: M_Boats: Porta-Potti...
Fitting the Porta-Potti to the hold by using boiling water inside and pressing the Tetford 125 Potti into place sounds feasable, but has anyone done this and what are the risks? I hate to buy a new Potti and ruin it. I cant believe that hold has been made so small for all these years. Is there an old model Potti that did fit it? Lou Aliotta _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!