I know there are a million dissenting opinions, but my ‘84 was on rollers and there was no issue with the hull at all, and no issue launching and recovering either, super easy with rollers. As I’ve always said, there are literally millions of boats sitting on roller equipped trailers without damage, they can’t all be wrong. Get a couple of small rocks or sand embedded in those bunk boards and watch it shred your hull every time the boat grinds across it and you’ll be be repairing that too (I’ve seen it). With an adequate number of rollers the M15 shouldn’t weigh enough to damage its own hull on rollers unless your boat was built with shoddy workmanship and a thin hull, most of the weight should be carried on the keel anyway! And I’m not going to get in another long “rollers vs bunks“ argument, just giving one person’s opinion, worth exactly what you payed for it. Rusty www.rustyknorr.weebly.com
On Jul 18, 2020, at 11:00 AM, montgomery_boats-request@mailman.xmission.com wrote:
Send montgomery_boats mailing list submissions to montgomery_boats@mailman.xmission.com
To subscribe or unsubscribe via the World Wide Web, visit https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
or, via email, send a message with subject or body 'help' to montgomery_boats-request@mailman.xmission.com
You can reach the person managing the list at montgomery_boats-owner@mailman.xmission.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..."
Today's Topics:
1. Re: Rollers (Ian Black) 2. Re: Rollers (Dave Scobie)
----------------------------------------------------------------------
Message: 1 Date: Sat, 18 Jul 2020 13:33:19 +0000 From: Ian Black <seaweeble@hotmail.com> To: "whitsonalan@aol.com" <whitsonalan@aol.com>, For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Rollers Message-ID: <MWHPR14MB1120DC867395B3F5418C745DA47D0@MWHPR14MB1120.namprd14.prod.outlook.com>
Content-Type: text/plain; charset="Windows-1252"
I would strongly suggest foregoing rollers and install bunk-boards. They are much easier on the hull. I did this for M-15 after spotting some deformations in the hull from my rollers. This is an Arizona boat so heat and weight didn?t do the fiberglass any good.
Ian M-17 Seaweeble M-15 Judi B
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
From: Alan via montgomery_boats<mailto:montgomery_boats@mailman.xmission.com> Sent: Thursday, July 16, 2020 10:56 PM To: montgomery_boats@mailman.xmission.com<mailto:montgomery_boats@mailman.xmission.com> Subject: M_Boats: Rollers
I?m in the process of refurbishing the trailer for our M15 and was wondering about opinions on rollers. The trailer currently has the standard tapered type. I?m thinking of switching to a flat type that the keel might set more squarely on. Thanks , Alan
Sent from AOL Mobile Mail Get the new AOL app: mail.mobile.aol.com
------------------------------
Message: 2 Date: Sat, 18 Jul 2020 06:58:54 -0700 From: Dave Scobie <scoobscobie@gmail.com> To: whitsonalan@aol.com, For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Rollers Message-ID: <CAGjBOA4BgcPQ1u902uDfVg0gHhWstyd2vch9_d61Y8VoQxR5-Q@mail.gmail.com> Content-Type: text/plain; charset="UTF-8"
Alan:
I recommend duplicating what exists. On the older TrailRite trailers the sloped roller helps guide the boat to the center.
The clearish yellow or orange rollers leave less marks and seem to stand up to sunlight better than the black rubber.
Just to confirm - keep the hull bunkboards. Don't convert the trailer to something like an EZRoller. This setup will damage the hull as it crates pressure points - seen it, fixed it and replaced a M15 trailer that was all rollers and no bunkboards.
:: Dave Scobie :: M6'8" #650 :: SV SWALLOW - sv-swallow.com :: former owner M17 #375 SWEET PEA - m17-375.com :: former owner M15 #288 SCRED - www.freewebs.com/m15-named-scred/
On Thu, Jul 16, 2020, 8:57 PM Alan via montgomery_boats < montgomery_boats@mailman.xmission.com> wrote:
I?m in the process of refurbishing the trailer for our M15 and was wondering about opinions on rollers. The trailer currently has the standard tapered type. I?m thinking of switching to a flat type that the keel might set more squarely on. Thanks , Alan
Sent from AOL Mobile Mail Get the new AOL app: mail.mobile.aol.com
------------------------------
Subject: Digest Footer
_______________________________________________ montgomery_boats mailing list montgomery_boats@mailman.xmission.com https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
------------------------------
End of montgomery_boats Digest, Vol 209, Issue 10 *************************************************