Oh, two of these on the back of the transom ..one for the brass thing and one for this one. On Aug 10, 2016 3:27 PM, wrote: Quartermaster. ... On Aug 10, 2016 2:59 PM, "Jazzy" <jazzydaze@gmail.com> wrote: Hi, anchored in Quartermaster Harbor. Vashon Island, WA. Gorgeous day and a good place to study some work junk. Here's a pick inside... the brass deal is a 90 degree elbow, then a hose, double clamped and out what looks like the stock through hull... I like the setup. Was just wondering if you guys had a fancy flapper valve or something. .. On Aug 10, 2016 1:59 PM, <swwheatley@comcast.net> wrote: No. As Gilasailr said, that appears to be a garboard drain plug someone has repurposed to replace the o.e. aluminum tube. Again, done well, that is a good upgrade because bronze lasts forever in a marine environment and aluminum does not. I would be interested to see photos of what was used where the drain exits the hull, and what was used to connect it all up. ----- Original Message ----- From: "Jazzy" <jazzydaze@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmis sion.com> Sent: Wednesday, August 10, 2016 2:37:48 PM Subject: M_Boats: Cockpit drain.. Is this what you guys have?
