Hello, I am not the webmaster for msog.org. Gerry Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: Henry Rodriguez <heinzir@gmail.com> Sent: Thursday, January 20, 2022 9:49:19 AM To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: M_Boats: Re: msogphotosite.com Gerry, Are you also the webmaster for the msog.org site? Thank you for the great opportunity to share ideas on the msogphotosite. Henry Monita On Thu, Jan 20, 2022, 9:57 AM Gerald Wyatt <wyattgs@gmail.com> wrote:
Hi Everyone,
Please send emails to webmaster@msogphotosite.com. Please include boat name, hull number, and general location and I will get you an account.
Gerry
Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: Gerald Wyatt <wyattgs@gmail.com> Sent: Thursday, January 20, 2022 7:51:07 AM To: For and about Montgomery Sailboats < montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Re: 1/12/22 Recommendation re: ballast quantity to purchase
Hi Dave,
My apologies to everyone for not responding. If you need access, send another email. Lost track in the business of life.
I’ll do better…
Gerry
Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: Dave Scobie <scoobscobie@gmail.com> Sent: Thursday, January 20, 2022 7:36:05 AM To: For and about Montgomery Sailboats < montgomery_boats@mailman.xmission.com> Subject: M_Boats: Re: 1/12/22 Recommendation re: ballast quantity to purchase
Gerry!
Good to hear from you!! I've sent email messages but not heard back so sending you this note via the listproc.
I've had a couple of folks contact me trying to get accounts on the MSOGphotosite stating they never received a response after sending an email.
:: Dave Scobie :: M6'8" #650 :: Baba 30 #233 DEJA VU :: SV SWALLOW - sv-swallow.com :: former owner M17 #375 SWEET PEA - m17-375.com :: former owner M15 #288 SCRED - m15namedscred.wordpress.com <<-- new site!
On Thu, Jan 20, 2022, 8:30 AM Gerald Wyatt <wyattgs@gmail.com> wrote:
Hi Tim,
Why don’t you use the MSOG photo site. I run the site, but haven’t seen a lot of activity recently. Part of the problem is my failure to check the site email! I’ll be better about that!
Gerry
Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: tdelacy@wavecable.com <tdelacy@wavecable.com> Sent: Thursday, January 13, 2022 6:44:31 AM To: 'For and about Montgomery Sailboats' < montgomery_boats@mailman.xmission.com> Subject: M_Boats: Re: 1/12/22 Recommendation re: ballast quantity to purchase
Thank you Bob.
I am planning on pursuing an approach Dave Scoobie recommended. I am going to create resin lead bricks from the lead shot and epoxy them to the shoal keel and then layup the outer skin of my shoal keel to the lead bricks. I like this idea as the entire shoal keel should have a degree of structural integrity.
Guess I am planning on hitting the bottom a couple of time here in the Salish Sea and inland lakes. 😊
Tim
-----Original Message----- From: Bob Eeg <montgomeryboats@hotmail.com> Sent: Wednesday, January 12, 2022 10:34 PM To: For and about Montgomery Sailboats < montgomery_boats@mailman.xmission.com> Subject: M_Boats: Re: 1/12/22 Recommendation re: ballast quantity to purchase
Ballast is 600 pounds total. Counting the centerboard. Use lead shot in 25 pound bags. Fix the hull. Pour in the shot from above. Bob
Sent from my iPad
On Jan 12, 2022, at 8:31 PM, Sailing Spark <arthaberland@gmail.com> wrote:
Tim,
I would love pictures of what you had to do to retrieve all those steel punchings out of the hull. Sounds like quite a job. Depending on where you are located, I may have lead for you. Laying beneath my Monty is the ballast from my old Sea Sprite 23, about 1400 pounds worth of lead that has stubbornly refused to be easily cut up into smaller chunks.
Art.
On Wed, Jan 12, 2022 at 8:38 PM <tdelacy@wavecable.com> wrote:
Gentlemen,
1. I have started the repair process of my cracked shoal keel by removing the steel punchings. 2. Dave Scoobie visited the other night and suggested I ask Jerry for the weight of ballast to purchase.
a. Hull # MMP 173320981.
3. So far I have pulled out most of the steel punchings.
a. Just shy of 300 lbs. b. There is a lot steel punchings that just went everywhere, not sure if was 10% of what I have removed everywhere though. c. The remainder in the keel will probably take a week or more to chase out. The solidified oxidized stuff just doesn't want to leave the boat.
4. I have the day off Friday and a local source of reclaimed range lead shot #7 to #9 that will provide me the weight I need (500 lbs is possible).
a. If possible would like to purchase all the lead I need. b. No worries, if I don't hear from anyone prior to Friday, between excavating the stubborn steel ballast pockets and figuring out how to cast resin lead bricks, I'll have opportunities to purchase additional lead in the future.
Thank you,
Tim de Lacy
-- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
-- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus