Hey John, yeah dashed the comment off in a hurry.. anywhere in my comments you can read boot as bootstripe.. As "boot top" = "top of bootstripe" Keith *Keith R. Martin, P.Eng.* *Burnaby, B.C. Canada* *Serenity, M17 #353* On 9 March 2018 at 17:05, John Schinnerer <john@eco-living.net> wrote:
Can someone clarify 'boot' and 'boot top' here? I am assuming it means 'bootstripe', e.g. the stripe at the waterline...but 'bottom of boot top' and 'well above the waterline at boot top' are confusing me.
thanks, John S.
On 03/09/2018 04:47 PM, Keith R. Martin wrote:
Hey Tom,
Interesting, if I understand you correctly these blisters are forming well above the water line along the boot top???...
I barrier coated the bottom of my M17 in my second season of owning her, but I stopped the barrier coat just at the bottom of the boot top...
I am planing to start painting the boot with anti-fouling as I was getting some growth along the bottom of the boot top, perhaps I will barrier the boot to as well prior to applying the antifouling..
Keith
*Keith R. Martin, P.Eng.*
*Burnaby, B.C. Canada* *Serenity, M17 #353*
On 9 March 2018 at 16:33, Thomas Buzzi <thomaspbuzzi@gmail.com> wrote:
Thanks, Robbin. There are several clusters of them numbering about 900 or
so. I am going to use citrus to clean off the old bottom paint and then use a barrier coat, #2000. Above the waterline I think some yellow tinted epoxy then some NuGlass to waterproof it. Fair winds, Tom B.
<https://www.avast.com/sig-email?utm_medium=email&utm_ source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_ source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Fri, Mar 9, 2018 at 6:58 AM, Robbin Roddewig < robbin.roddewig@verizon.net
wrote:
Hi Tom
those sure sound like blisters. Fresh water BTW is more aggressive than salt in the osmosis that forms blisters. So if you have not done a
barrier
coat you might think about it. Why they are above your boot stripe I cannot say. I had blisters on my M-17 in the stern port quarter that seemed to have resulted from the boat being wrapped. Anyway you can go look at the multitude of online information about blisters and repairing. Epoxy is what I used after grinding each out
some.
I have treated blisters on a compac, two of my M boats. It is not a huge deal but takes a little effort. Best of luck.
Robbin
currently no M boats (but always looking), Marshal 22 & Gig Harbor Lobster Boat
Robbin Roddewig robbin.roddewig@verizon.net
-----Original Message----- From: Thomas Buzzi <thomaspbuzzi@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman. xmission.com> Sent: Thu, Mar 8, 2018 10:08 pm Subject: M_Boats: Gelcoat
While pressure washing the old bottom paint off my M17 I managed to dislodge hundreds of pencil eraser sized bits of the yellow gelcoat just above the boot top.All of the spots are round, like bubbles formed under the gelcoat were popped by the water jet. It almost seemed that there was some water migration along that line between the white boottop and the yellow hull. What is the best way to handle all the missing yellow gelcoat? The coat underneath is white and doesn't look like just a resin layer or fiberglas cloth weave. Anybody know what this second coat of material might be composed of? And how best to fill in all those holes? Would just making
up
some yellow gelcoat and troweling it into the holes work? I am not too worried about cosmetics at this point.I would just wet sand the patches
and
maybe coat everything with the "Glass" coating I used two years ago which has held up very well. I will be keeping the boat in a fresh water lake this year here in central Texas. Any ideas would be appreciated. Fair winds, Tom B.
<https://www.avast.com/sig-email?utm_medium=email&utm_ source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_ source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-- John Schinnerer - M.A., Whole Systems Design
- Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john@eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com