Sorry for the trigger finger. She's a sound design with good self righting. sal In a message dated 3/31/2013 5:39:45 P.M. Mountain Daylight Time, sailtim@yahoo.com writes: I have a Monty 15, a 2007, hull # 641. It was built by NorSea boat builders. My beautiful boat doesn't have any added flotation at all under the vbirth , just a huge storage space under the vbirth. Also, there is no added flotation under the cockpit floor. There is no added positive flotation material at all. I talked to Mr. Eng, owner of the company. He said that the extra floatation isn't necessary because the boat can't be knocked over. He suggested that I put an inner tube under the cockpit floor if it bothered me. He did say that all of the forward individual lockers are floatation. My opinion is that if you put the weather boards in place and close the hatch, water isn't going into the cabin. I can only imagine how bad the cabin would smell with a new inner tube in it. I don't think tire stores smell that great. If it gets windy and rough, be sure to put the boards in and close the hatch, no problem. Tim Erwin, " Dark Star " # 641 Sent from my iPad On Mar 29, 2013, at 11:05 AM, montgomery_boats-request@mailman.xmission.com wrote:
Send montgomery_boats mailing list submissions to montgomery_boats@mailman.xmission.com
To subscribe or unsubscribe via the World Wide Web, visit http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats or, via email, send a message with subject or body 'help' to montgomery_boats-request@mailman.xmission.com
You can reach the person managing the list at montgomery_boats-owner@mailman.xmission.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..."
Today's Topics:
1. Re: Towing with the extension out (GARY M HYDE) 2. Re: Lifting the M-15 (John Tyner) 3. Re: Towing with the extension out (stevetrapp) 4. Re: Towing with the extension out (GARY M HYDE) 5. Re: Towing with the extension out (Tom Smith) 6. Re: Lifting the M-15 (Robert Hall) 7. Iron centreboard on M17 (Bill Wickett) 8. Re: Iron centreboard on M17 (jerry montgomery) 9. Re: Iron centreboard on M17 (W David Scobie) 10. Re: Iron centreboard on M17 (Bill Wickett) 11. Re: Iron centreboard on M17 (Bill Wickett) 12. Re: Iron centreboard on M17 (R.K. Graves) 13. Flotation (George R. Iemmolo) 14. Re: Flotation (Tom Smith) 15. Re: Flotation (Conbert Benneck) 16. Re: Flotation (W David Scobie)
----------------------------------------------------------------------
Message: 1 Date: Tue, 26 Mar 2013 13:54:06 -1000 From: GARY M HYDE <gmhyde1@mac.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Towing with the extension out Message-ID: <16941021-5DD7-4467-9876-2416C5BAA172@mac.com> Content-Type: text/plain; charset=us-ascii
Steve/ To answer your other Q, I store indoors in winter.
~~~_/)~~~ Gary Sent from my iPhone :-)
On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp@q.com> wrote:
Gary, I am sure that you know this from experience of driving on the winding country roads that surround your sailing area on Lake Couer D' Alene. Do you tow you M-boat home or into town for winter, or store it there at the boat yard? Steve
----- Original Message ----- From: "GARY M HYDE" <gmhyde1@mac.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Tuesday, March 26, 2013 2:33 PM Subject: Re: M_Boats: Towing with the extension out
Actually the sway is less with the long tongue because the car has better leverage on the trailer.
~~~_/)~~~ Gary Sent from my iPhone :-)
On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2@gmail.com> wrote:
My concern would be that the pivot point (ball hitch) is an increased distance from the weight (boat) any sway would be greater than normal ("Give me a lever long enough and I can move the earth") and could cause the auto to be affected.
George
-----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Ronald McNeil Sent: Monday, March 25, 2013 8:25 PM To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Towing with the extension out
I am considering to just tow my M17 with the extension out on the trailer. The extension on my Pacific trail is not all that long, while extended there is about 4-5 feet of overlap with two pins holding it.
I tow it about 15 miles back and forth to the lake, no highway but speeds up to 55mph. I know there are ways to set it up to easily extended it without taking it off the hitch but I have not gotten around to that yet.
Does anyone think this would be unsafe or not recommended for some reason?
Thanks, Ron McNeil Jackpot
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
------------------------------
Message: 2 Date: Tue, 26 Mar 2013 20:11:50 -0400 From: John Tyner <tynerjr@md.metrocast.net> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Lifting the M-15 Message-ID: <51523946.6010106@md.metrocast.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hey! That's my boat! (Now, anyway, I bought it from John Harris (of Chesapeake Light Craft) in 2003.) ---- John Tyner M-15 #412 "Chimpanzee"
On 3/26/2013 6:22 PM, W David Scobie wrote:
lifting an M15 example using a method related to Jerry's comments on how strong the chainplates and stern cleats are. in this case the 'lifter' is a forklift -
http://msogphotosite.com/MSOG/b15cbrep/b15cbrep1.jpg
the description of the above here -
http://msogphotosite.com/M15CBRepl.html
(you can click the spaces where the images are suppose to be ... still working on updating the site).
here is another way -
http://msogphotosite.com/m15garage.html
(you can click the spaces where the images are suppose to be ... still working on updating the site).
and another -
http://msogphotosite.com/15breezecb.html
(you can click the spaces where the images are suppose to be ... still working on updating the site).
if 'smiley' sees these posts he can comment on the lifting bridle he and a boatyard created. i've seen pictures and it is a VERY nice setup.
:: Dave Scobie
--- On Tue, 3/26/13, Robert Hall <bert.hall@rogers.com> wrote:
Hello All, Somewhere in the literature on the net I have seen illustrated instructions on how to raise a Monty 15 off its trailer and remove the trailer while lowering the boat onto supports so work can be done on the bottom/keel. To date my search has failed to locate any information of use.Do any of my fellow M-15 owners have any advice? Thanks. RTH.
------------------------------
Message: 3 Date: Tue, 26 Mar 2013 17:20:28 -0700 From: "stevetrapp" <stevetrapp@q.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Towing with the extension out Message-ID: <5C1E20B4FC8C4BDFB48E03316CCFA7CE@STEVEEW> Content-Type: text/plain; charset="iso-8859-1"
Gary, Amazing. Particularly towing it with your Subaru Forester. I have a 2001 Subaru Forester that groans to get my M-15 up the hill from Conkling Park. Steve
----- Original Message ----- From: "GARY M HYDE" <gmhyde1@mac.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Tuesday, March 26, 2013 4:52 PM Subject: Re: M_Boats: Towing with the extension out
Steve : I've towed the M17 about 10,000 miles including from California, to & from Lake Havasu, 5 times from Pullman to Western WA and back, and many shorter trips, all with a 2004 Subaru Forester Turbo, rated at 2400 pound towing capacity. I also adjusted the trailer axle position to produce a 200 pound tongue weight (about 10% of trailer weight). I also have Trailer brakes, wouldn't leave home without em. Also, I tow usually with the tongue at mid extension as mentioned before. That is NOT the maximum extension sometimes used for launching.
~~~_/)~~~ Gary Sent from my iPhone :-)
On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp@q.com> wrote:
Gary, I am sure that you know this from experience of driving on the winding country roads that surround your sailing area on Lake Couer D' Alene. Do you tow you M-boat home or into town for winter, or store it there at the boat yard? Steve
----- Original Message ----- From: "GARY M HYDE" <gmhyde1@mac.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Tuesday, March 26, 2013 2:33 PM Subject: Re: M_Boats: Towing with the extension out
Actually the sway is less with the long tongue because the car has better leverage on the trailer.
~~~_/)~~~ Gary Sent from my iPhone :-)
On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2@gmail.com> wrote:
My concern would be that the pivot point (ball hitch) is an increased distance from the weight (boat) any sway would be greater than normal ("Give me a lever long enough and I can move the earth") and could cause the auto to be affected.
George
-----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Ronald McNeil Sent: Monday, March 25, 2013 8:25 PM To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Towing with the extension out
I am considering to just tow my M17 with the extension out on the trailer. The extension on my Pacific trail is not all that long, while extended there is about 4-5 feet of overlap with two pins holding it.
I tow it about 15 miles back and forth to the lake, no highway but speeds up to 55mph. I know there are ways to set it up to easily extended it without taking it off the hitch but I have not gotten around to that yet.
Does anyone think this would be unsafe or not recommended for some reason?
Thanks, Ron McNeil Jackpot
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
------------------------------
Message: 4 Date: Tue, 26 Mar 2013 15:06:07 -1000 From: GARY M HYDE <gmhyde1@mac.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Towing with the extension out Message-ID: <FCD3280D-39B0-45CE-9D55-EB7E5747A8EB@mac.com> Content-Type: text/plain; charset=us-ascii
The turbocharger is the difference, along with the trailer brakes.
~~~_/)~~~ Gary Sent from my iPhone :-)
On Mar 26, 2013, at 2:20 PM, stevetrapp <stevetrapp@q.com> wrote:
Gary, Amazing. Particularly towing it with your Subaru Forester. I have a 2001 Subaru Forester that groans to get my M-15 up the hill from Conkling Park. Steve
----- Original Message ----- From: "GARY M HYDE" <gmhyde1@mac.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Tuesday, March 26, 2013 4:52 PM Subject: Re: M_Boats: Towing with the extension out
Steve : I've towed the M17 about 10,000 miles including from California, to & from Lake Havasu, 5 times from Pullman to Western WA and back, and many shorter trips, all with a 2004 Subaru Forester Turbo, rated at 2400 pound towing capacity. I also adjusted the trailer axle position to produce a 200 pound tongue weight (about 10% of trailer weight). I also have Trailer brakes, wouldn't leave home without em. Also, I tow usually with the tongue at mid extension as mentioned before. That is NOT the maximum extension sometimes used for launching.
~~~_/)~~~ Gary Sent from my iPhone :-)
On Mar 26, 2013, at 12:06 PM, stevetrapp <stevetrapp@q.com> wrote:
Gary, I am sure that you know this from experience of driving on the winding country roads that surround your sailing area on Lake Couer D' Alene. Do you tow you M-boat home or into town for winter, or store it there at the boat yard? Steve
----- Original Message ----- From: "GARY M HYDE" <gmhyde1@mac.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Tuesday, March 26, 2013 2:33 PM Subject: Re: M_Boats: Towing with the extension out
Actually the sway is less with the long tongue because the car has better leverage on the trailer.
~~~_/)~~~ Gary Sent from my iPhone :-)
On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2@gmail.com> wrote:
My concern would be that the pivot point (ball hitch) is an increased distance from the weight (boat) any sway would be greater than normal ("Give me a lever long enough and I can move the earth") and could cause the auto to be affected.
George
-----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Ronald McNeil Sent: Monday, March 25, 2013 8:25 PM To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Towing with the extension out
I am considering to just tow my M17 with the extension out on the trailer. The extension on my Pacific trail is not all that long, while extended there is about 4-5 feet of overlap with two pins holding it.
I tow it about 15 miles back and forth to the lake, no highway but speeds up to 55mph. I know there are ways to set it up to easily extended it without taking it off the hitch but I have not gotten around to that yet.
Does anyone think this would be unsafe or not recommended for some reason?
Thanks, Ron McNeil Jackpot
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 2641/6205 - Release Date: 03/26/13
------------------------------
Message: 5 Date: Tue, 26 Mar 2013 18:10:33 -0700 From: Tom Smith <openboatt@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Towing with the extension out Message-ID: <CA+3pONL_JENXpkAnGrL9h7jCnrRWnfmU_y5gFOGrBQaqvp5fuQ@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Aloha Gary!! t
On Tue, Mar 26, 2013 at 4:39 PM, GARY M HYDE <gmhyde1@mac.com> wrote:
Tom: Once an engineer, always an engineer. Aloha!
~~~_/)~~~ Gary Sent from my iPhone :-)
On Mar 26, 2013, at 12:13 PM, Tom Smith <openboatt@gmail.com> wrote:
Gary 'bookworm' Hyde... :-) t
On Tue, Mar 26, 2013 at 2:33 PM, GARY M HYDE <gmhyde1@mac.com> wrote:
Actually the sway is less with the long tongue because the car has better leverage on the trailer.
~~~_/)~~~ Gary Sent from my iPhone :-)
On Mar 26, 2013, at 4:11 AM, "George R. Iemmolo" <griemmolo2@gmail.com> wrote:
My concern would be that the pivot point (ball hitch) is an increased distance from the weight (boat) any sway would be greater than normal ("Give me a lever long enough and I can move the earth") and could cause the auto to be affected.
George
-----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Ronald McNeil Sent: Monday, March 25, 2013 8:25 PM To: montgomery_boats@mailman.xmission.com Subject: M_Boats: Towing with the extension out
I am considering to just tow my M17 with the extension out on the trailer. The extension on my Pacific trail is not all that long, while extended there is about 4-5 feet of overlap with two pins holding it.
I tow it about 15 miles back and forth to the lake, no highway but speeds up to 55mph. I know there are ways to set it up to easily extended it without taking it off the hitch but I have not gotten around to that yet.
Does anyone think this would be unsafe or not recommended for some reason?
Thanks, Ron McNeil Jackpot
------------------------------
Message: 6 Date: Wed, 27 Mar 2013 10:07:15 -0400 From: "Robert Hall" <bert.hall@rogers.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Lifting the M-15 Message-ID: <97685DE21DBE418C9E425DEBF3AF049D@Pavilion> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original
Hi David, That material you sent is exactly what I need. Many thanks. RTH.
-----Original Message----- From: W David Scobie Sent: Tuesday, March 26, 2013 6:22 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Lifting the M-15
lifting an M15 example using a method related to Jerry's comments on how strong the chainplates and stern cleats are. in this case the 'lifter' is a forklift -
http://msogphotosite.com/MSOG/b15cbrep/b15cbrep1.jpg
the description of the above here -
http://msogphotosite.com/M15CBRepl.html
(you can click the spaces where the images are suppose to be ... still working on updating the site).
here is another way -
http://msogphotosite.com/m15garage.html
(you can click the spaces where the images are suppose to be ... still working on updating the site).
and another -
http://msogphotosite.com/15breezecb.html
(you can click the spaces where the images are suppose to be ... still working on updating the site).
if 'smiley' sees these posts he can comment on the lifting bridle he and a boatyard created. i've seen pictures and it is a VERY nice setup.
:: Dave Scobie
--- On Tue, 3/26/13, Robert Hall <bert.hall@rogers.com> wrote:
Hello All, Somewhere in the literature on the net I have seen illustrated instructions on how to raise a Monty 15 off its trailer and remove the trailer while lowering the boat onto supports so work can be done on the bottom/keel. To date my search has failed to locate any information of use.Do any of my fellow M-15 owners have any advice? Thanks. RTH.
------------------------------
Message: 7 Date: Wed, 27 Mar 2013 17:38:19 -0400 From: Bill Wickett <billwick@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: M_Boats: Iron centreboard on M17 Message-ID: <CAFd5cDm=WDVkm2vELVpsxe8FftH06CZwERjj7EJ_1exKc=8e=Q@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Who can advise the year that the CB was changed from iron to laminate? Which CB would an '89 M17 be likely to have? Would the ballast be iron or lead?
Thanks,
Bill Wickett Makin' Time M17 #622
------------------------------
Message: 8 Date: Wed, 27 Mar 2013 14:50:27 -0700 From: "jerry montgomery" <jerry@jerrymontgomery.org> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Iron centreboard on M17 Message-ID: <D73F15ADF31D4E40B0E04D88BF811D37@jerryws10> Content-Type: text/plain; format="flowed"; charset="iso-8859-1"; reply-type="original"
That was about the time when I switched from steel punchings to lead shot in the ballast; I'd guess that your boat has lead ballast but the old iron board. You can check the ballast by running a compass or magnet over the keel, and the board by crawling under and looking.
jerry ----- Original Message ----- From: "Bill Wickett" <billwick@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Wednesday, March 27, 2013 2:38 PM Subject: M_Boats: Iron centreboard on M17
Who can advise the year that the CB was changed from iron to laminate? Which CB would an '89 M17 be likely to have? Would the ballast be iron or lead?
Thanks,
Bill Wickett Makin' Time M17 #622
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8193 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen
------------------------------
Message: 9 Date: Wed, 27 Mar 2013 14:55:10 -0700 (PDT) From: W David Scobie <wdscobie@yahoo.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Iron centreboard on M17 Message-ID: <1364421310.65307.YahooMailClassic@web121702.mail.ne1.yahoo.com> Content-Type: text/plain; charset=iso-8859-1
Bill:
from information shared by Randy G. -
In 1988 (roughly at hull #400) the centerboard was changed from 220 lbs cast iron to the same centerboard as is used in the M15, weighing 40 lbs. The M15 is comprised of a fiberglass-lead-fiberglass sandwich and does not require a winch to raise and lower. Also, the ballast was increased to compensate for the change in centerboard weight, and the ballast was changed from steel punching to lead. These changes took places over several boats. For example; our [Randy's] 1988 M17 #410 has the fiberglass centerboard but steel punching ballast.
(can't remember where i got this specifically ... what i have is credited to Randy.)
:: Dave Scobie
--- On Wed, 3/27/13, Bill Wickett <billwick@gmail.com> wrote:
Who can advise the year that the CB was changed from iron to laminate? Which CB would an '89 M17 be likely to have? Would the ballast be iron or lead?
Thanks,
Bill Wickett Makin' Time M17? #622
------------------------------
Message: 10 Date: Wed, 27 Mar 2013 17:57:50 -0400 From: Bill Wickett <billwick@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Iron centreboard on M17 Message-ID: <CAFd5cD=WEn1_Gox2K7_FNXi_F0=6Dpes_QuQtK=She8j2XVAcQ@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Thank you Jerry
On Wed, Mar 27, 2013 at 5:50 PM, jerry montgomery <jerry@jerrymontgomery.org
wrote:
That was about the time when I switched from steel punchings to lead shot in the ballast; I'd guess that your boat has lead ballast but the old iron board. You can check the ballast by running a compass or magnet over the keel, and the board by crawling under and looking.
jerry ----- Original Message ----- From: "Bill Wickett" <billwick@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Wednesday, March 27, 2013 2:38 PM Subject: M_Boats: Iron centreboard on M17
Who can advise the year that the CB was changed from iron to laminate?
Which CB would an '89 M17 be likely to have? Would the ballast be iron or lead?
Thanks,
Bill Wickett Makin' Time M17 #622
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8193 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/**
SLOW-PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>
------------------------------
Message: 11 Date: Wed, 27 Mar 2013 17:58:51 -0400 From: Bill Wickett <billwick@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Iron centreboard on M17 Message-ID: <CAFd5cDkzye9bja=krMQUPTammug1Nm5TSkAaZG6M6CvhgZmJRQ@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Appreciate the info Dave. Will take a magnet with me when I look at her.
Bill
On Wed, Mar 27, 2013 at 5:55 PM, W David Scobie <wdscobie@yahoo.com> wrote:
Bill:
from information shared by Randy G. -
In 1988 (roughly at hull #400) the centerboard was changed from 220 lbs cast iron to the same centerboard as is used in the M15, weighing 40 lbs. The M15 is comprised of a fiberglass-lead-fiberglass sandwich and does not require a winch to raise and lower. Also, the ballast was increased to compensate for the change in centerboard weight, and the ballast was changed from steel punching to lead. These changes took places over several boats. For example; our [Randy's] 1988 M17 #410 has the fiberglass centerboard but steel punching ballast.
(can't remember where i got this specifically ... what i have is credited to Randy.)
:: Dave Scobie
--- On Wed, 3/27/13, Bill Wickett <billwick@gmail.com> wrote:
Who can advise the year that the CB was changed from iron to laminate? Which CB would an '89 M17 be likely to have? Would the ballast be iron or lead?
Thanks,
Bill Wickett Makin' Time M17 #622
------------------------------
Message: 12 Date: Wed, 27 Mar 2013 17:16:58 -0700 From: "R.K. Graves" <rkgraves@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Iron centreboard on M17 Message-ID: <CADyq_zxE=RhQO88CPgAaZ4UxdCoX62fuPvO+D3xs37DAGbJ8ag@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Bill,
The CB change for cast iron to laminated fiberglass/lead occurred around hull number 400, roughly early 1988. I have 1988 hull #407 and it has the fiberglass/lead CB but steel punchings for ballast. As far as I know all the non-cast iron CB's are fiberglass/lead. I believe the same fiberglass/lead CB is used on both the 15 and the 17. The change from steel punching to lead ballast occurred sometime after hull #407. The best way to tell which type of ballast a 17 has is to see if a large magnet is attracted to the keel (takes a pretty good size magnet for the test).
Randy Graves
On Wed, Mar 27, 2013 at 2:38 PM, Bill Wickett <billwick@gmail.com> wrote:
Who can advise the year that the CB was changed from iron to laminate? Which CB would an '89 M17 be likely to have? Would the ballast be iron or lead?
Thanks,
Bill Wickett Makin' Time M17 #622
------------------------------
Message: 13 Date: Fri, 29 Mar 2013 09:48:08 -0500 From: "George R. Iemmolo" <griemmolo2@gmail.com> To: <montgomery_boats@mailman.xmission.com> Subject: M_Boats: Flotation Message-ID: <DFFF3D5AD99F41C89CDFE154853B17C0@GeorgeHPDV9500> Content-Type: text/plain; charset="us-ascii"
I have started to work on my recent acquisition that has been sitting for some years unused and in need of some TLC. I find a large amount of Styrofoam block beneath the deck. Is this normal?
George
96 M15 #602
NoNameYet
------------------------------
Message: 14 Date: Fri, 29 Mar 2013 07:57:16 -0700 From: Tom Smith <openboatt@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Flotation Message-ID: <CA+3pONJomet_yD-LHJYd67oGkbbSzd2_9Y48gScUSsi0BNuQOw@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Yes, it's normal. t
On Fri, Mar 29, 2013 at 7:48 AM, George R. Iemmolo <griemmolo2@gmail.com>wrote:
I have started to work on my recent acquisition that has been sitting for some years unused and in need of some TLC. I find a large amount of Styrofoam block beneath the deck. Is this normal?
George
96 M15 #602
NoNameYet
------------------------------
Message: 15 Date: Fri, 29 Mar 2013 11:01:18 -0400 From: Conbert Benneck <chbenneck@sbcglobal.net> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Flotation Message-ID: <5155ACBE.7040007@sbcglobal.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
On 29-Mar-13 10:48 AM, George R. Iemmolo wrote:
Hi George,
Yes, it's normal.
You'll find styrofoam blocks up in the bow compartment, if you remove the screws holding the cover in place.
You'll also find it under the cockpit sole, in the bilge.
Connie
ex M15 #400 LEPPO
I have started to work on my recent acquisition that has been sitting for some years unused and in need of some TLC. I find a large amount of Styrofoam block beneath the deck. Is this normal?
George
96 M15 #602
NoNameYet
------------------------------
Message: 16 Date: Fri, 29 Mar 2013 09:05:06 -0700 (PDT) From: W David Scobie <wdscobie@yahoo.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Flotation Message-ID: <1364573106.18922.YahooMailClassic@web121704.mail.ne1.yahoo.com> Content-Type: text/plain; charset="iso-8859-1"
George:
to add a photo to the comments already shared that yes the M15 has positive flotation foam under forward end of the v-berth and under the cockpit floor i've attached to this email a photo showin under the v-berth (after unscrewing the locker lid).
:: Dave Scobie :: former M15 owner - www.freewebs.com/m15-named-scred
--- On Fri, 3/29/13, George R. Iemmolo <griemmolo2@gmail.com> wrote:
I have started to work on my recent acquisition that has been sitting for some years unused and in need of some TLC. I find a large amount of Styrofoam block beneath the deck. Is this normal?
George
96 M15 #602
NoNameYet? ?
-------------- next part -------------- A non-text attachment was scrubbed... Name: bowlocker.jpg Type: image/jpeg Size: 52507 bytes Desc: not available URL: <http://mailman.xmission.com/cgi-bin/mailman/private/montgomery_boats/attachments/20130329/fdf3017e/attachment.jpg>
------------------------------
_______________________________________________ montgomery_boats mailing list montgomery_boats@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
End of montgomery_boats Digest, Vol 121, Issue 15 *************************************************