I think that is what Mann, the kid who sailed to Hawaii did as well. I believe JM helped him as advisor getting the boat ready. Sent from my iPhone
On Feb 9, 2021, at 7:44 AM, Jim Sadler <jimsadler@jascopacific.com> wrote:
I used (2) plastic bulk head fittings and just butted them together and glued everything.....the flanges to the transom and bulkhead and the fitting to each other where they meet. No access hole and no link hose. Used 1 7/8 hole saw from each side
-----Original Message----- From: montgomery_boats <montgomery_boats-bounces@mailman.xmission.com> On Behalf Of Edward Epifani Sent: Monday, February 8, 2021 8:14 AM To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: SV Pelican cockpit scuppers
Nice job, Jim. Did you get two fittings for each drain and link inner and outer with hose? Did you have to cut an access panel in rear cockpit wall? Ed
Sent from my iPhone
On Feb 7, 2021, at 5:17 PM, Jim Sadler <jimsadler@jascopacific.com> wrote:
Get Outlook for iOS<https://aka.ms/o0ukef> <IMG_3741.jpg>