Maybe make a scrap wood u that fits around the section of hull you want your cradle to go around, and spile it like fitting a plank, or screw on strips of scrap would whose ends just touch the laps…lots of ways to pull the shape off the boat itself. On Sat, May 27, 2023 at 12:49 PM Jim Sadler <jimsadler@jascopacific.com> wrote:
Thanks Dave but I have no trailer to measure.
Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: Dave Scobie <scoobscobie@gmail.com> Sent: Saturday, May 27, 2023 10:13:53 AM To: For and about Montgomery Sailboats < montgomery_boats@mailman.xmission.com> Subject: M_Boats: Re: Loft drawings for M15
Jim.
3 or 4 Sage 17s are on lifts. The mechanical kind not the floating kind.
Just duplicate the spacing of the trailer bunks.
:: Dave Scobie :: M6'8" #650 :: Baba 30 #233 DEJA VU :: former owner SV SWALLOW - sv-swallow.com :: former owner M17 #375 SWEET PEA - m17-375.com :: former owner M15 #288 SCRED - m15namedscred.wordpress.com
On Sat, May 27, 2023, 10:07 Jim Sadler <jimsadler@jascopacific.com> wrote:
Dave
When the Pelican is in the slip I plan to have it setting on a float so it is out of the salt water. The float will be submersible and "float" and raise the boat out of the water when pumped up
I know .....this is nuts but I want to eliminate my bottom maintenance expence.
Capt Jim
-----Original Message----- From: Dave Scobie <scoobscobie@gmail.com> Sent: Saturday, May 27, 2023 9:45 AM To: For and about Montgomery Sailboats < montgomery_boats@mailman.xmission.com> Subject: M_Boats: Re: Loft drawings for M15
Jim:
Like a boat lift?
:: Dave Scobie :: M6'8" #650 :: Baba 30 #233 DEJA VU :: former owner SV SWALLOW - sv-swallow.com :: former owner M17 #375 SWEET PEA - m17-375.com :: former owner M15 #288 SCRED - m15namedscred.wordpress.com
On Sat, May 27, 2023, 09:11 Jim Sadler <jimsadler@jascopacific.com> wrote:
Are lofted drawings available for M15?
Or scale model?
I want to build dry dock that matches the hull profile
Tha nks Skippers
Capt Jim SV Pelican M15