Thanks for the confirmation on the portapottie fit. I can get the portapottie this weekend. --- Larry......M-15 #189 -----Original Message----- From: William B. Riker [mailto:wriker@mindspring.com] Sent: Wednesday, July 28, 2004 6:08 PM To: 'For and about Montgomery Sailboats' Subject: RE: M_Boats: Portapottie Larry, Yes, the 135 fits under the plywood cover. It has to be bottomed out in the well, and may require some heat and weight to allow the base to conform the shape of the well, but it will fit. It fits in Storm Petrel, #184. Bill Riker M15 - #184 Storm Petrel -----Original Message----- From: montgomery_boats-bounces+wriker=mindspring.com@mailman.xmission.com [mailto:montgomery_boats-bounces+wriker=mindspring.com@mailman.xmission.com] On Behalf Of Hughston, Larry Sent: Wednesday, July 28, 2004 10:29 AM To: 'For and about Montgomery Sailboats' Subject: RE: M_Boats: Portapottie Don, On the portapottie question of fit, does the height of the portapottie allow the plywood cover and cushion lay flat at the same level as the port and starboard V berths? That would make it a very short portapottie indeed! ---Larry Hughston in Sacramento. -----Original Message----- From: LUDLOWD2@aol.com [mailto:LUDLOWD2@aol.com] Sent: Friday, July 23, 2004 5:05 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Portapottie Thetford 135 fits the new model M-15. Don _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats