Interesting. So you have no problem with the split backstay with that setup? Sounds like you would need a vang to flatten your main sometime.When you are on a run does the mainsheet cut across the cockpit ? <https://www.avast.com/sig-email> This email has been sent from a virus-free computer protected by Avast. www.avast.com <https://www.avast.com/sig-email> <#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Thu, Feb 4, 2016 at 11:29 PM, Jazzy <jazzydaze@gmail.com> wrote:
Mine hooks onto the corners of the transom! It's weird but clears up the cockpit completely..
Jazz On Feb 4, 2016 11:17 PM, "John Schinnerer" <john@eco-living.net> wrote:
A question for those who know the history & reasoning...
At some point the traveler on the M17 was moved from just aft of the companionway to further back in the cockpit (not sure how far back, can anyone give a measurement? Half way? Two-thirds? Just in front of tiller? Or...?).
Why was it moved, and what are the pros and cons of each location?
Mine is a '74 so the original was just behind companionway. But some previous owner of my M17 installed a big wide windward sheeting traveler, mounted on top of the cockpit seats (forward, approximately above where the original was).
It is in the way in multiple ways - blocks regular use of seat space, lounging use of seat space, companionway access.
I am going to reduce the width and remount on cockpit floor. Before I do that I'd like to hear why I should keep it forward where the original traveler was, or, why I should move it back where the newer M17 travelers are.
thanks, John S.
-- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john@eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com