Here is a pic of Busca's fishfinder wire routing: http://www.htmills.com/images/LF-fishfinderrear.jpg Basically, the wires run to under the cockpit where they split up with the power jogging over to a hole in the side of the galley (could be a berth) and the transducer wire going to the transducer in the skeg. Hope this helps, Tod Mills M17 #408, 1987 galley model BuscaBrisas
-----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Joe Murphy Sent: Monday, January 19, 2009 10:29 AM To: For and about Montgomery Sailboats Subject: M_Boats: Wire routing
This is a question for those of you M-17 owners with electrical components mounted to the outside of the cabin bulkhead such as depth sounders, lights for the compass, etc? Where/how did you route your wiring back to the battery compartment under the V berth to keep them out of the way and inconspicuous?? I can't figure out a good way to jump from the interior of the deck to get under the pan.
Thanks Joe Seafrog M17
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.10.7/1894 - Release Date: 1/18/2009 12:11 PM