I don't have images handy to share and won't have the system set up until later next month. For what it is worth, it shows up fairly often on sailing videos on my YouTube channel (https://www.youtube.com/@dgrah) though I can't say which time in which video at the moment. The system I use was as described in this forum at some point in the past. Essentially I have a couple external tanks, one 3.5 gallons and one 6 gallons and I pick one based on the length of time I'll need to use the tank. They are both typical red outboard plastic tanks probably purchased on Amazon. Attached to the tank is a typical outboard hose with a pump bulb. I connect this hose through a right angle brass fitting screwed into a spare cap I purchased for the motor. I sort of had to gut the cap of all its venting features to screw the right angle fitting in and drilled a little vent hole. When the tank on the motor is empty it takes 30 to 40 pumps of the bulb to fill it up. The system has worked great. David GrahBishop CaliforniaMontgomery 15 Sky Date: Thu, 21 Mar 2024 14:03:59 -0700 From: Rusty Knorr <rustyinafrica@yahoo.com> Subject: M_Boats: Re: 2 hp Honda runtime To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Message-ID: <C0287830-E032-4D65-A403-271B3AA61182@yahoo.com> Content-Type: text/plain; charset=utf-8 I’d like to see that pump system, David. My boat came with one but it leaks really badly so I’ve discarded it. I like the idea though. Are you coming up for the Salish100?! www.rustyknorr.weebly.com