Shipping came to 5.80, so the total would be 15.80. My address is 3749 Rock Island Dr Sacramento 95827. jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Monday, May 20, 2013 7:33 PM Subject: Re: M_Boats: Ida rudder
Hi jerry, Sounds like a deal to me. How would you like the funds delivered? My address is 302 Palmetto Avenue Rockport, Texas 78382 Thanks, Tom Buzzi
On Mon, May 20, 2013 at 4:07 PM, jerry montgomery <jerry@jerrymontgomery.org
wrote:
Tom- I have in my hopt little hand a gudgeon, the base measures 1 5/8 X 4, and the half inch hole is centered1 1/4" off the underside of the base. It's your for the bargain price of a ten-spot, plus shipping. I'll need an address.
jerry ----- Original Message ----- From: "Thomas Buzzi" <thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.xmission.com>> Sent: Thursday, May 16, 2013 4:22 PM Subject: Re: M_Boats: Ida rudder
Hello Jerry,
Would you let me know how I can obtain one of the rudder grugeons that you said you still had? Thanks, Tom Buzzi
On Wed, May 1, 2013 at 6:40 PM, jerry montgomery <jerry@jerrymontgomery.org>**wrote:
Could you have that backwards? We made most of the 17s with three-pintle
setups, and I'm not totally sure but I think the Ida rudders have a "normal" two-pintle setup. At any rate I think I've got gudgeons; the kind that are a simple angled stainless sheet metal part that bolts to the transom.
I'm leaving tomorrow morning for my Ma's 97th BD but I'll take my laptop.
jerry ----- Original Message ----- From: "Thomas Buzzi" < thomaspbuzzi@gmail.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.** xmission.com <montgomery_boats@mailman.**xmission.com<montgomery_boats@mailman.xmission.com>
Sent: Wednesday, May 01, 2013 1:46 PM Subject: M_Boats: Ida rudder
Mr. Montgomery,
My Montgomery 17 was manufactured in 1978. I now have a chance to install an Ida sailor rudder on it from a 2005 Montgomery 17. That setup uses three pintles whereas my older stock rudder model uses only two. Can a third be added so this setup will work on my boat or is there some other consideration that needs tending to? You mentioned you have a stock of old parts. Do you have a set of the old grugeon/pintle (s) available? Regards, Tom B
-- I am using the free version of SPAMfighter. SPAMfighter has removed 8493 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
Do you have a slow PC? Try a Free scan http://www.spamfighter.com/** SLOW-PCfighter?cid=sigen<http:**//www.spamfighter.com/SLOW-** PCfighter?cid=sigen<http://www.spamfighter.com/SLOW-PCfighter?cid=sigen>