The modern era Oak Bucket? http://www.duckworksmagazine.com/05/articles/toilet/index.cfm Cabela's sells something similar called a "lugable loo". They also sell a couple versions of the Thetford. On Jun 19, 2013, at 12:27 PM, W David Scobie wrote:
George:
the Thetford Model TC 26104 Porta Pot is also known as the Thetford 135. this is the potti that the Glessers have in the '86 M15. i also had a 135 in my '84 M15.
as Tom wrote the '135' unit has been discontinued. Theford is making a replacement (model 260) BUT the 'exact replacement' isn't an exact replacement! the base is not the same size and will not fit in the M15.
so ... do some Internet searching to see if you can find some remaining stock, or look for one that may fit (i haven't found one).
the 'wag bag' system is an option -
http://www.cleanwaste.com/demo/go-anywhere-toilet
the 'toilet', when assembled, will not fit in the M15's potti-space when the v-berth cover is in place. this means you need to set up the unit each time it is used.
another option is to use the 'wag bags' in a bucket that is cut down to fit under the v-berth. there are toilet seats made to fit on buckets and seal (do an Internet search for 'bucket toilet seat').
We can also hope Dave Scobie is not on a cruise, 'cause he knows about all this stuff.
sadly i'm not on Larry Yake's annual San Juan and Gulf Is. cruise :-( busy buildin' boats :-) (a good thing)
--- On Sun, 6/16/13, Tom Jenkins <tjenk@gte.net> wrote:
Tim,
I have an M17 (Hull 626, 2004), but I imagine the opening for a porta potti is the same on both our models. My Thetford Model TC 26104 Porta Pot just fits, although I don't know if it is still made. It is 15" front to back, 12.5" wide, and 12" high (must be 2.5 gallons). Thetford and SeaLand both make units of about that size, so I think you should measure your spot just to make sure 1/2" or so difference is not that critical. You might also look into the waste absorbent packs that were in vogue awhile back, if they are still available. We can also hope Dave Scobie is not on a cruise, 'cause he knows about all this stuff.
Tom Jenkins June Lake, CA
On Jun 16, 2013, at 3:24 PM, Tim Erwin wrote:
Hello from the Texas Redneck Riviera The year model of my boat is a 2007. There is a recess where the porta potti should fit, I assume. I would appreciate it if someone could save me some time and just tell me make and model that fits. Thanks Tim Erwin. 2007 m15. ( Dark Star ) # 641 Rockport, Texas