Doug, I've seen and like this method for attaching sheets. I've also read a description of this somewhere, but can't remember where I saw it. Is the knot just seized on? I thought I read it was sewn as well. I would also be interested in the alternate method you mention in your email... T Tom Smith and Jane Van Winkle M15/345 -- Chukar Sandpoint, Idaho -----Original Message----- From: Doug Kelch [mailto:doug_kelch@yahoo.com] Sent: Tuesday, July 30, 2002 6:57 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Admiral Hornblower & jib sheets These pictures are the best explanation of the method I have seen. I tried it with my old stiff jib sheets and the loop would not go through the cringle on tack of the sail. I have an alternate rope only method that is a little slower to change than the one depicted. If any one is interested, let me know and I will send pictures. Doug Kelch --- "htmills@bright.net" <htmills@bright.net> wrote:
In preparation for my Maine trip, I did a little shopping for various and sundry objects. Since Maine is known to be a foggy, foggy place I thought it best to have a horn to go with my VHF securite calls. I blindly picked the Admiral Hornblower horn. Man, now I'm gonna need earplugs too! Seriously!
Also am switching the jibsheet attachment from individual for each sail to one that hooks to the clew. Someone on the Potter board posted a very clever and simple method and shortly afterwards Martin on the TSBB posted a slightly refined method:
http://www.trailersailor.com/uploads/1_the_thig_i_was_trying_to_discibe.jpg
http://www.trailersailor.com/uploads/passing_through_the_cringle.jpg
http://www.trailersailor.com/uploads/knotted_end_thru_the_loop.jpg
Thanks for the responses on the rot. I think I'll try to avoid completely cutting out the board since it is in such an inaccessable place and so far I've avoided cutting out the bottom of the wet locker. If other approaches don't work I may end up having to do that; I hope not. I think I'll cut out around the bolt holes as much as I can, try the antifreeze method, fill with reinforced epoxy, add heavy plate washers, bed well, and keep my fingers crossed.
Tod
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats