Thanks JohnMike W On Friday, May 24, 2019 10:52:53 AM PDT, John Schinnerer <john@eco-living.net> wrote: I didn't see any pic of your boat Mike, must have gone to Dave only, not the list? Anyhow, there's no liner under the v-berth in my #38 from '74, and no support or other customizations for holding a portapotty. Just the inside of the hull. Some pics attached. Looks like at some point something with a round-ish base was epoxied in there...you can see areas with translucent greenish epoxy. I'm guessing it was added by some prior owner and then removed...I doubt that sloppy greenish epoxy is OEM. Nothing like it anywhere else in the boat. cheers, John On 5/24/19 9:45 AM, Dave Scobie wrote:> Mike.
I don't have any pics. It just provided places to attach things. Good
in it
reduced likelihood.of drilling a hole through hull when installing a mounting bracket. Bad in it limited customization.
Maybe someone can photo under their M17 vberth? (Needs to be a Jerry built boat as the mold was destroyed by Jerry about '94/95.)
:: Dave Scobie :: M6'8" #650 :: SV SWALLOW - sv-swallow.com :: former owner M17 #375 SWEET PEA - m17-375.com :: former owner M15 #288 SCRED - www.freewebs.com/m15-named-scred/
-- John Schinnerer - M.A., Whole Systems Design -------------------------------------------- - Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john@eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com