9 May
2009
9 May
'09
2:10 p.m.
I did not try my IdaSailor rudder (2007 vintage) until yesterday, and I too discovered that the 48" tiller reaches 3" past the mainsheet. I have not tried it on the water, but I assume I would have to steer with the tiller raised, and raise it up to the boom for tacking. I can shorten the base about 2" without making a hokey setup, but that is not enough. I would be interested to know why the tiller is so much longer than it is on the stock rudder, and how you folks have solved the problem. I certainly don't want to cut off the nice knob on the fore end. Thanks, Tom Jenkins 2004 M17