Sail--Boat (Break Out Another Thousand) On Fri, Jan 29, 2016 at 9:55 PM, Jazzy <jazzydaze@gmail.com> wrote:
Agreed! I redid my Snipe trailer too many times until I found out about the glue shrink wrap stuff! Hoping to make use of what's all in there if I can. We'll see how it goes...no boat playing today. I went for an LED nav light today and the computers were down. Saved me some cash for a day atleast.
Oh I have questions about safety equip...I'll post with that subject...
Jazz On Jan 29, 2016 7:25 PM, "Thomas Buzzi" <thomaspbuzzi@gmail.com> wrote:
They also have heat shrink connectors that have heat activated glue inside the shrink sleeve which makes these things really watertight. My boat trailer uses them and they work great!
<
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig...
This email has been sent from a virus-free computer protected by Avast. www.avast.com <
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig...
<#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Fri, Jan 29, 2016 at 9:15 PM, John Schinnerer <john@eco-living.net> wrote:
If you're going to be in saltwater/coastal marine environment at all, use quality marine grade wire, heat-seal marine grade splices, connectors, plugs, etc. also. Yeah it costs more, but the quantities are small for little boats like ours, and, the troubleshooting and fixing you *won't* have to do in a year or two are worth it (unless you really like that kind of thing... :-).
cheers, John S.
On 01/29/2016 03:16 PM, Jazzy wrote:
Thanks Jerry! Love the Monty...my first real sailboat! I like the idea of the light by the compression post alot. And it makes sense to run it up that way for the mastlight which is my next project after the compass light. The mast light has one black wire up top, and the bottom of the mast shows two "speaker" type wires. Adding power didnt light it with alligater clips. Doesn't sound good. Lol. Hopefully a bulb. The bow light and stern light weren't too hard to find. The stern light gave me a little hell because it's blue and green at the light and then spliced somewhere in between to a loose brown and white at under the sink. ....go figure!
And I hear ya Tom...I have to get power to behind the compass on the starboard side of the companion way. The wires are already up there if I could just find the other end of it! Lol...nothing behind the panel or under the port sink. I'll have a looksie upwards under the sink. May have missed that. If not I'll have to telephone pole it somehow. They have nice conduit that could hide stuff if need be, but I'm hoping to avoid that.
Jazz On Jan 29, 2016 9:36 AM, "Thomas Buzzi" <thomaspbuzzi@gmail.com> wrote:
Thanks, Jerry, for that last statement. I used the existing wires wherever
possible but now if they don't work I will realize I may have drilled through one while mounting additional hardware. Any ideas on how to string new wires and attaching them to the fiberglass overhead and avoiding having them look like phone wires strung from pole to pole? Tom B <
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig...
This
email has been sent from a virus-free computer protected by Avast. www.avast.com <
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig...
<#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Fri, Jan 29, 2016 at 11:24 AM, <jerry@jerrymontgomery.org> wrote:
Prior to re-tooling in 81 we laminated the wire in with frabbergrass
to
several locations, including the bow and stern lights. After retooling
we
ran all wires from the switch panel, up the mast compression post and
put a
tricolor at the masthead and the cabin light right next to the post. Worked out great and much easier to work on. If I was messing around
with
an old boat, I'd just copy the new setup and forget about the embedded wires.
I know that a few of the embedded wires got drilled thru when installing aftermarket deck hardware.
-----Original Message----- From: swwheatley@comcast.net Sent: Friday, January 29, 2016 8:23 AM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Where does this wire end?
My M17 (1976) had a wire like that (embedded in the cabin overhead). If I recall correctly, it ran forward to the aft edge of the forward hatch, followed that edge a bit and then emerged to be connected to a thru-deck connector in the vicinity of the mast step. In my case, I believe it was used for an anchor light.
----- Original Message -----
From: "Jazzy" <jazzydaze@gmail.com> To: "For and about Montgomery Sailboats" < montgomery_boats@mailman.xmission.com> Sent: Thursday, January 28, 2016 9:16:08 PM Subject: M_Boats: Where does this wire end?
https://www.dropbox.com/s/he3d0wj5fm3ayno/20160128_174720.jpg?dl=0
Your looking from the v berth out towards the companion way at the "ceiling" over the sink...the blue and green wire that feeds that little bus bar goes into the fiberglass there. I can't for the life of me find
the
other end. The little bus bar is unpowered at the moment and the
blue/green
feeds it. On a positive note...stern light is now working from panel for the first time in forever like the nav light! Whoohooo!
Jazz
-- John Schinnerer - M.A., Whole Systems Design
- Eco-Living - Whole Systems Design Services People - Place - Learning - Integration john@eco-living.net - 510.982.1334 http://eco-living.net http://sociocracyconsulting.com