Howard, If your roach is only an inch too big, you could remove the slugs and use the bolt rope. That would solve two problems! And might avoid recutting the sail. Of course, I'm not a slug fancier. You may not have any choice with the jib. My jib is right at the limit, too. I am looking for a more efficient piece of hardware for the tack. Good Luck, Bill Riker M-15 #184 Storm Petrel -----Original Message----- From: montgomery_boats-admin@mailman.xmission.com [mailto:montgomery_boats-admin@mailman.xmission.com]On Behalf Of Howard Audsley Sent: June 04, 2002 10:22 PM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: Doug's Tricks On 6/4/02 8:08 PM, "Bill Riker" <wriker@mindspring.com> wrote:
Howard,
So what's the "ok news?" That you ruined someones day? he he he. . . .
Bill Riker M-15 #184 Storm Petrel
--
That too : ) No, they are going to require some tweaking. The luffs on both sails are a smidgeon too long. The jib is virtually maxed out on the forestay. Any stretch and it will sag. The roach on the full batten main snags on the backstay a bit in light air jibes. One of the battens is a bit too long and needs to be trimmed. The luff slugs on the main tend to jam. They both need telltales. Hopefully, nothing I can't solve. But even with all that, it's a better sailing boat. And sneaking by bigger boats is becoming more and more common. It could get habit forming! Howard PS. I did get waxed by a 31 footer flying only his main, but he also had his motor running. Once he shut that off and rolled out his jib, I was able to keep him in sight. For a puny little 17 footer, she is starting to get some attention. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats