Ironic that David Grah doesn't need a custom cover, since Rich's Upholstery in Bishop California has made great custom covers for our Nor'Sea 27 and our Montgomery 17, as well as spars, etc. We just have too much snow and too much wind to do the inexpensive tarp technique. Tom On May 10, 2013, at 5:25 PM, Daniel Rich wrote:
Good info. I will check into it.
If your guy in Denver could do it, that could be great. My boat has a stern and bow pulpit, so that may be different. If it came to pass, obviously I would have to send photos and possibly some measurements if my boat is different than Glesser's.
Daniel On May 10, 2013, at 3:28 PM, W David Scobie <wdscobie@yahoo.com> wrote:
Daniel:
not near S.F. but they do boat covers -
Baxter & Cicero, Inc. Canvas and Sailmakers 1760 Monrovia Ave. C-11 Costa Mesa CA 92627 949-642-7238 http://www.baxterandcicero.com/
talk with Joan Susman.
B&C did a cover for a Sage 17. well made and was done without them ever seeing the boat. who knows, they may have done an M15 in years past and kept the pattern (they are located down where Jerry built all his boats in the 70s and 80s) .
my M15's cover was made by Lasrsen Sails (still in business, no longer in the boat/sail business). pictures of my 15's cover -
http://www.msogphotosite.com/MSOG/b15scobie/bscobie13.jpg
http://www.msogphotosite.com/MSOG/b15scobie/bscobie9.jpg
i have a guy in Denver that could do one. could use the Glesser's M15 as a 'pattern boat'.
:: Dave Scobie
--- On Fri, 5/10/13, Daniel Rich <danielgrich@gmail.com> wrote:
Montypals:
I want a nice cover for my M15. So, I emailed the Sailor's Tailor, but they don't have a pattern for the M15. They would need to have the boat. Not possible, since they are in Ohio, and I am in California! (Well, I know Dan Phy could do it, but that is another story...)
So, where can I go in the SF Bay Area to get a nice cover? I am tired of the $50 tarp I use.
Daniel M15 Kestrel