Thanks Joe...I tried an Ebay company and they didn't have any in stock. I was trying to measure and order from Sailor's Tailor who makes the boat cover. Thanks, Tony -----Original Message----- From: montgomery_boats-bounces@mailman.xmission.com [mailto:montgomery_boats-bounces@mailman.xmission.com] On Behalf Of Joe Murphy Sent: Friday, May 01, 2009 7:26 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Bottom Paint Hi Tony, Yes I did get a sail cover and it fits perfectly. It came with a tiller cover as well. I've just spent the last hour going through old emails and digging around for the paper work. It must be on the boat. I'll check tomorrow and get back to you. I think it was either Lee Sails or an Ebay company named comboat. I'm drawing a blank. Joe ----- Original Message ----- From: <treed@communitycareinc.com> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Sent: Thursday, April 30, 2009 10:26 PM Subject: Re: M_Boats: Bottom Paint
Joe....Have you had a sail cover made for Seafrog yet? If you have one I was wondering what measurements you used to have it made. I just wanted to make sure I am getting the right measurements for a good fit...T
E. Tony Reed
-----Original Message-----
From: "Joe Murphy" <seagray@embarqmail.com> Subj: Re: M_Boats: Bottom Paint Date: Wed Apr 29, 2009 6:30 pm Size: 1K To: "For and about Montgomery Sailboats"<montgomery_boats@mailman.xmission.com>
I used Micron Extra. I keep Seafrog in saltwater 10 months straight per year. I pull her out after 5 months. Looked great. I agree with Bones. You can recoat with the same bottom paint as long as it is the same product. I like the ablative paint which flakes off during the time the boat is in the water thus shedding the nasties. I don't know if you use ablative paints in fresh water. But there are a gazillion sites out there with great advice. Joe ----- Original Message ----- From: <bownez@juno.com> To: <montgomery_boats@mailman.xmission.com> Sent: Tuesday, April 28, 2009 11:34 PM Subject: Re: M_Boats: Bottom Paint
Hi John,
I have Micron CSC on the M17, and Awlgrip All-star on the M23.
Both seem to be fabulous, although far from inexpensive.
Both boats are trailered and sailed in fresh water.
I have been led to believe that unless you remove all the previous bottom paint, recoating should be done with the same product.
For what it is worth.
Later,
Bones
____________________________________________________________ Click here for free information on how to reduce your debt by filing for bankruptcy. http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTLjhbWpbqjdDCx3K2JX IfXGBbk54WSbnfTNDKTJiJo8wXH6orLAfm/
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
--- message truncated ---
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
Remember, there is no privacy on the Internet!
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats Remember, there is no privacy on the Internet!