17 May
2019
17 May
'19
4:31 p.m.
That's what I was hoping to do but after seeing it in place I am re-thinking it. It doesn't look to be a good fit on my bow. After measuring, I see I'd have to pull the back of the plate down 3/4" on each side, and I still couldn't use the front two mounting holes due to where they fall. Photos below. In other photos I see some boats have a different top deck edge; they appear to roll off and cover the top of the hull with a vertical section. My deck has a stepped down flange that sits on the hull flange, and is lower. (If that all makes sense) -Gerry
On May 17, 2019, at 11:30 AM, Dave Scobie <scoobscobie@gmail.com> wrote:
original
