Todd, Here is the mount I used.... http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId =696038&catalogId=10001&langId=-1&storeId=11151&storeNum=50366&subdeptNum=50 411&classNum=50412 Here is the Garelick page http://www.garelick.com/Aluminum-Auxiliary-Motor-Bracket-For-4-Stroke-Motors it is made by Garelick but I see now that West Marine is selling it under their own name. You can find it on other sites as a "Garelick" mount. It has long travel (16") which is great for getting the motor clear.....and it is made for motors to 170lbs and sprung as such. I had to add a lsight downward push to get my motor in....and it nearly lifted itself when new. Mine finally had a spring rotate and take some of the tension off of it....lessening the lifting force....but Garelick stood behind it and fixed it for free. It's a great mount. I just used some pieces of stainless plate to make the backing plates. Hope that helps... Sean