19 May
2016
19 May
'16
8:45 p.m.
Good for you. I recommend that anyone who is buying a Mr. Jerry Montgomery boat just do a simple Check. Take a portable drill motor and a 3 inch hole saw and drill a hole in the keel about 6 inches up from the bottom. Take a look and if you see Mush like this photo pass on it. We've done a lot of repairs and new center boards over the last 18 years and A boat with severe rust isn't worth buying. After drilling out a 3 inch plug its easy To patch with some glass. Takes about 10 minutes. Be well Bob Montgomery boats and NorSea Yachts. 949-489-8227
