I solved this very problem Larry. I think the building I now refer to as the boat shed has a standard opening. To get the M17 in I simply lowered the tongue of the trailer to the ground and slid the whole works backwards into the building. Admitedly it was close--the pulpit cleared by a couple of inches. I was prepared to let air out of the tires, but that tactic didn't turn out to be necessary... t Tom Smith & Jane Van Winkle Sandpoint, Idaho M15-345, Chukar M17-064, Unnamed -----Original Message----- From: Larry Yake [mailto:leyake@juno.com] Sent: Saturday, December 13, 2003 5:03 PM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: M17 line drawings Gary, I don't know if all M17's are the same, but my '76 has a 21'4" mast, 21'10" with fittings and masthead light. If your garage door is a standard 7', it won't fit in unless you remove the bow pulpit and tabernacle. Larry On Sat, 13 Dec 2003 13:41:51 -0800 Gary M. Hyde <gmhyde1@mac.com> writes:
Wayne: I'm interested in those M17 line drawings. I need to know how high the boat is on the trailer to know if it will fit through my garage door
and how long the mast is. Thanks. --Gary Hyde M15 #235 'Vanilla' N24 'Sailabration'
On Monday, April 14, 2003, at 06:10 PM, wayne yeargain wrote:
Hi Jerry: Sorry your e-mail bounced, don't know why it did that - I am at the same address, must have been a gremlin in the wire. Any way thanks for the M17 line drawings, I got them today, & am going to start some drawings right away. I'll send you and any one who is intrested, some copies when I'm done. Had my M17 out Sat. about 10knt wind and it just romped along like the throughbred it is......... life is sweet. Happy sails Wayne
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats This message was scanned for viruses!!