That's simple 1" tubing, I believe 22 1/2 long but don't trust me on that; measure! -----Original Message----- From: Kevin Sandwick Sent: Monday, May 07, 2018 11:46 AM To: montgomery_boats@mailman.xmission.com Subject: Re: M_Boats: montgomery_boats Digest, Vol 183, Issue 6 Thanks for the response to Montgomery specific parts request. The aluminum tube on one of my spreaders is damaged on the clevis pin side. Serviceable but I would like to replace it. Thanks again Kevin ________________________________ From: montgomery_boats <montgomery_boats-bounces@mailman.xmission.com> on behalf of montgomery_boats-request@mailman.xmission.com <montgomery_boats-request@mailman.xmission.com> Sent: Monday, May 7, 2018 1:00:11 PM To: montgomery_boats@mailman.xmission.com Subject: montgomery_boats Digest, Vol 183, Issue 6 Send montgomery_boats mailing list submissions to montgomery_boats@mailman.xmission.com To subscribe or unsubscribe via the World Wide Web, visit https://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats or, via email, send a message with subject or body 'help' to montgomery_boats-request@mailman.xmission.com You can reach the person managing the list at montgomery_boats-owner@mailman.xmission.com When replying, please edit your Subject line so it is more specific than "Re: Contents of montgomery_boats digest..." Today's Topics: 1. Montgomery Specific parts. (Kevin Sandwick) 2. Re: Montgomery Specific parts. (Bob Eeg) 3. Re: Montgomery Specific parts. (Dave Scobie) 4. Re: Montgomery Specific parts. (jerry@jerrymontgomery.org) 5. Re: Montgomery Specific parts. (Dan Farrell) 6. Re: Montgomery Specific parts. (Dan Farrell) 7. Re: Montgomery Specific parts. (Dave Scobie) 8. Re: Montgomery Specific parts. (Dave Scobie) 9. Montgomery 17 for Sale by owner - SF Bay area (Tyler Heerwagen) 10. Re: Rigging for my boat (Timothy JarviMD) 11. Re: Montgomery Specific parts. (Dan Farrell) 12. Re: Montgomery Specific parts. (Henry Rodriguez) ---------------------------------------------------------------------- Message: 1 Date: Sun, 6 May 2018 19:19:31 +0000 From: Kevin Sandwick <ksandwick@hotmail.com> To: "montgomery_boats@mailman.xmission.com" <montgomery_boats@mailman.xmission.com> Subject: M_Boats: Montgomery Specific parts. Message-ID: <DM3PR16MB06821054E1F9A22CD475A400AA840@DM3PR16MB0682.namprd16.prod.outlook.com> Content-Type: text/plain; charset="us-ascii" Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin, Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ------------------------------ Message: 2 Date: Sun, 6 May 2018 19:26:27 +0000 From: Bob Eeg <montgomeryboats@hotmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <CY4PR17MB1975BD1AE136AC1C6B91F7D0B7840@CY4PR17MB1975.namprd17.prod.outlook.com> Content-Type: text/plain; charset="utf-8" We built and produce all of the Montgomery models. Maybe you didn?t know that.? What do you need..? Bob 949-489-8227 Montgomery Boats Sent from my iPad
On May 6, 2018, at 12:20 PM, Kevin Sandwick <ksandwick@hotmail.com> wrote:
Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
------------------------------ Message: 3 Date: Sun, 06 May 2018 20:01:48 +0000 From: Dave Scobie <scoobscobie@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <CAGjBOA5zPG_Cn09QpBwp_Z9fDS4gj3c+_mF010PW8s_ntHji5Q@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Kevin. Most if your boat hardware is Schaefer or Garhauer. There are some custom parts, cleats for example, you need to find an equivalent. Jerry, jerry@jerrymontgomery.org, still has a few of the custom parts. :: Dave Scobie On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick@hotmail.com> wrote:
Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
------------------------------ Message: 4 Date: Sun, 6 May 2018 16:14:49 -0700 From: <jerry@jerrymontgomery.org> To: "For and about Montgomery Sailboats" <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <901F24C0548B4E6B95A84ACD9445A085@CH002914> Content-Type: text/plain; format=flowed; charset="UTF-8"; reply-type=original Kevin- It looks like you have one of the 400-some 17's that I made, which don't have too much in common with the eeg-built boats except that they came out of the same molds. If you can be more specific about what parts you need, between Dave, Sage marine, and I, we can probably help. -----Original Message----- From: Dave Scobie Sent: Sunday, May 06, 2018 1:01 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Montgomery Specific parts. Kevin. Most if your boat hardware is Schaefer or Garhauer. There are some custom parts, cleats for example, you need to find an equivalent. Jerry, jerry@jerrymontgomery.org, still has a few of the custom parts. :: Dave Scobie On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick@hotmail.com> wrote:
Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
------------------------------ Message: 5 Date: Sun, 06 May 2018 21:05:49 -0500 From: Dan Farrell <msog@danf.us> To: Msog List <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <4du82idosmyayw6m5krjaay4.1525658540237@email.android.com> Content-Type: text/plain; charset=utf-8 Hi all, Jerry - and everyone else - can you help me identify the section used for a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive. Any input will be most appreciated. Thanks, Dan Farrell M17 #301 jerry@jerrymontgomery.org wrote:
Kevin- It looks like you have one of the 400-some 17's that I made, which don't have too much in common with the eeg-built boats except that they came out of the same molds. If you can be more specific about what parts you need, between Dave, Sage marine, and I, we can probably help.
-----Original Message----- From: Dave Scobie Sent: Sunday, May 06, 2018 1:01 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Montgomery Specific parts.
Kevin.
Most if your boat hardware is Schaefer or Garhauer. There are some custom parts, cleats for example, you need to find an equivalent. Jerry, jerry@jerrymontgomery.org, still has a few of the custom parts.
:: Dave Scobie
On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick@hotmail.com> wrote:
Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
------------------------------ Message: 6 Date: Sun, 06 May 2018 22:23:03 -0500 From: Dan Farrell <msog@danf.us> To: Msog List <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <0q5tocaqvg2nbfuwkm28ijxb.1525663383485@email.android.com> Content-Type: text/plain; charset=utf-8 Seem to have missed the key word - I need to replace the gooseneck casting for my boom. Dan Farrell M17 #301 Dan Farrell <msog@danf.us> wrote:
Hi all,
Jerry - and everyone else - can you help me identify the section used for a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive.
Any input will be most appreciated.
Thanks,
Dan Farrell M17 #301
jerry@jerrymontgomery.org wrote:
Kevin- It looks like you have one of the 400-some 17's that I made, which don't have too much in common with the eeg-built boats except that they came out of the same molds. If you can be more specific about what parts you need, between Dave, Sage marine, and I, we can probably help.
-----Original Message----- From: Dave Scobie Sent: Sunday, May 06, 2018 1:01 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Montgomery Specific parts.
Kevin.
Most if your boat hardware is Schaefer or Garhauer. There are some custom parts, cleats for example, you need to find an equivalent. Jerry, jerry@jerrymontgomery.org, still has a few of the custom parts.
:: Dave Scobie
On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick@hotmail.com> wrote:
Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
------------------------------ Message: 7 Date: Mon, 07 May 2018 03:23:10 +0000 From: Dave Scobie <scoobscobie@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <CAGjBOA7Cw781DavVxnpp7dsWiu22QJzX4X_PZEfyfAKrAix8jA@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Dan. You can't a 100% the same as the extrusion is no longer available. Closest is Dwyer's DM 6. It is freight shipping from the northeast ... Be ready for that sticker shock! More details in this linked PDF - http://msogphotosite.com/Scripts/Information/downloaddocument.php?id=199 :: Dave Scobie On Sun, May 6, 2018, 7:06 PM Dan Farrell <msog@danf.us> wrote:
Hi all,
Jerry - and everyone else - can you help me identify the section used for a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive.
Any input will be most appreciated.
Thanks,
Dan Farrell M17 #301
jerry@jerrymontgomery.org wrote:
Kevin- It looks like you have one of the 400-some 17's that I made, which don't have too much in common with the eeg-built boats except that they came out of the same molds. If you can be more specific about what parts you need, between Dave, Sage marine, and I, we can probably help.
-----Original Message----- From: Dave Scobie Sent: Sunday, May 06, 2018 1:01 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Montgomery Specific parts.
Kevin.
Most if your boat hardware is Schaefer or Garhauer. There are some custom parts, cleats for example, you need to find an equivalent. Jerry, jerry@jerrymontgomery.org, still has a few of the custom parts.
:: Dave Scobie
On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick@hotmail.com> wrote:
Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
------------------------------ Message: 8 Date: Mon, 07 May 2018 03:43:07 +0000 From: Dave Scobie <scoobscobie@gmail.com> To: For and about Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: Re: M_Boats: Montgomery Specific parts. Message-ID: <CAGjBOA4-BCrDt-c0Ub=SM8SOjgg-eincb_1EtueqBTrkrt_cxQ@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Dan. Need to see if Jerry has any old boomends laying around. The boom, like the mast, for the old boats is no longer available. How badly is it broken? Picture will help in diagnosis of solutions. :: Dave Scobie On Sun, May 6, 2018, 8:40 PM Dan Farrell <msog@danf.us> wrote:
Seem to have missed the key word - I need to replace the gooseneck casting for my boom.
Dan Farrell M17 #301
Dan Farrell <msog@danf.us> wrote:
Hi all,
Jerry - and everyone else - can you help me identify the section used for a '79 m-17? Looks like probably a Dwyer DM-1 but I'm not positive.
Any input will be most appreciated.
Thanks,
Dan Farrell M17 #301
jerry@jerrymontgomery.org wrote:
Kevin- It looks like you have one of the 400-some 17's that I made, which don't have too much in common with the eeg-built boats except that they came out of the same molds. If you can be more specific about what parts you need, between Dave, Sage marine, and I, we can probably help.
-----Original Message----- From: Dave Scobie Sent: Sunday, May 06, 2018 1:01 PM To: For and about Montgomery Sailboats Subject: Re: M_Boats: Montgomery Specific parts.
Kevin.
Most if your boat hardware is Schaefer or Garhauer. There are some custom parts, cleats for example, you need to find an equivalent. Jerry, jerry@jerrymontgomery.org, still has a few of the custom parts.
:: Dave Scobie
On Sun, May 6, 2018, 12:20 PM Kevin Sandwick <ksandwick@hotmail.com> wrote:
Greetings, Just purchased a new to me M-17, Hull # 400. I am slowly learning to navigate the Montgomery web sites but still have not located a source for Montgomery specific parts. At this time I don't need much and could possibly substitute if needed. Thanks in advance for any information Kevin,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
------------------------------ Message: 9 Date: Mon, 7 May 2018 03:49:24 +0000 (UTC) From: Tyler Heerwagen <theerwagen@yahoo.com> To: For and About Montgomery Sailboats <montgomery_boats@mailman.xmission.com> Subject: M_Boats: Montgomery 17 for Sale by owner - SF Bay area Message-ID: <1691352728.518564.1525664965202@mail.yahoo.com> Content-Type: text/plain; charset="utf-8" I have too many boats, and am going to put Seranita up for sale, our Tall Rig Montgomery 17.She features most significantly a <10 hours 2017 5HP Mercury Sail Power outboard motor, and a new bottom job by Grand Marina. Bottom was fine but I could not bear to pass her on in less that top condition. See attached for a description of Seranita, and links below for 360 views of the vessel. You can scroll around, up and down, and even zoom in in these roundme.com photos, compatible? with your mobile device. Also attached are 5 photos of Seranita from this evening on the trailer.Tyler 1977 M-17 #232Tall RigNew Mercury "Sail Power" Outboard, 5HPNew bottom job$8900.00 https://roundme.com/tour/269168/view/819883/ https://roundme.com/tour/269165/view/819873/